Having problems with your PC Desktops ?

My Mag LT926wb shuts off after a few seconds Works fine for a few seconds then click and the screen go dark.

\015 My Mag LT926wb shuts off after a few seconds \015\012Works fine for a few seconds then click and the screen go dark.\015

Answers :

Chech the power supply of your system
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Mag LT926wb shuts off after a few seconds Works fine for a few seconds then click and the screen go dark.


Chech the power supply of your system ... PC Desktops

Screen went black


Sounds like your monitor is shot or one of the connections in the back hope this helps regards Jim ... Computer Monitors

Screen went black


I don't know. I've never actually replaced parts in a monitor. If the bulb is expensive, it might be best to buy a new monitor. They're cheap nowadays. Or you can check if there's warranty on the monitor and it can probably be fixed for free. ... Acer X221WSD Monitor

Hp pavillion hdmi output was working fine and not the tv is dark. It shows a picture when booting up but once booted, the tv goes blank. Can you offer any solutions?


I had the same problem. The first time I used the HDMI port, it showed up perfectly on my TV. \015\012\015\012But, next day I get a blank screen. When I rebooted the laptop it would show the windows splash screen and go blank. \0 ... HP Pavilion dv7-1130us laptop

I have the same issue with my dv1000 "If I press the switch at the top left of the unit ( the one that puts the unit in standby when the lid is closed), the screen comes to life momentarily sometimes for 15 to 20 seconds. I can use with an external monitor and when the screen is dark, I can see that it is operating, but it is too dark to use.". I have changed the inverter and it still doesn't work, how do I check if th einverter I bought as a replacement works and/or is compatible?.


Usually inverters fail in one of the following ways:1. When you turn on the laptop, the screen lights up for a short period of time and then goes dark. You still can see an image but it is very dark, almost invisible and definitely not us ... HP Pavilion dv1000 Notebook

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Screen blanks out after a few seconds. If I turn


Fixya:\015\012\015\012\015\012\015\012\015\012\015\012My IE 8 loads the correct odds on the tote-board and then suddenly the odds go blank.I have to click down to another track and then click back up to get the odds working again.Th ... AOC LM720 17" Flat Panel LCD Monitor

The monitor goes blank after just a few seconds or sometimes works for hours.


Two possible causes are bad capacitors or a bad light inside the LCD panel.\015\012\015\012Open the unit and check to see if any of the capacitors in the power supplyor other boards look domed or vented on the top.\015\012\015 ... ViewSonic VX924 19" LCD Monitor

When i turn it on it takes me to a black screen that says start windows normally or start in safe mode and stuff and i click start normally and it keeps taking me back to the same place no matter what i need help??


Please select last known good configuration from the black screen if this doesnt work select safemode from that screen and restore your computer to earlier time when it was working fine,. please follow the steps below to restore your computer.\ ... PC Desktops

X2gen mw19u 19'' widescreen monitor going black


X2GEN - MW19U, same problem as described in the other posts. A week ago after a reboot it did not turn on. Pressed the power button, it turned off. Pressed it again after about a minute, all was fine until this morning. Same as before except t ... X2Gen MG19MY 19" LCD Monitor

Re: Errors being experienced with the ACER ASPIRE 5100-5758, OS VISTA. Error dealing with BUS:06, DEVICE:04, FUNCTION:00 AND ON TO FUNCTION:03


Hi, Nice report. We don't see these too often. You've had quite a few tech inclined people on your machine. My first hunch was memory timings and that could still be the problem. However, there is also memory on the display ad ... Acer Aspire 5100 Notebook

The screen on my Lattitude 120L won't come on after I close it


Goto control panel click on DISPLAY then screensave then POWER SETTINGS and on the left side there is a section called what to do when i close my lid click on that and for lid settings click on do nothing so after u close ur lid it wont disable ur sc ... Dell Latitude 120L Notebook

HP DV9700-L/side ports- which one will work for second display/TV


I do not know if this is the answer you are looking for, but I know that when I connected my S-video connection to some old crappy big screen TV, I had to set the laptop's second video output to specifically output to S-video. There were 3 or 4 diffe ... HP Pavilion dv9000z Notebook

HP m7060n Media Center PC had boot problem: now won't display any


Lets try to repair it using the windows installation disc. First things first, look at the motherboard down on the right lower side. I would like you to find the CMOS jumper, it will be three pins sticking up with a plastic jumper made of plastic fit ... HP Media Center m7060n PC Desktop

Erratic display My display was dark when I returned home. After turning it on and off a brief flickering image appeared then the display turned dark. The computer works fine with another monitor. Turning it on and off brings up a brief flickering image, but it only lasts a second or so before going dark. I just recieved a Gateway FPD 1830,it powers up,but the screen is blank,and when I push the source or on/off button I see the screen display but only for a second or two then it goes blank a


Since the computer works fine with another monitor, now try the defective monitor on another computer.Problem persists, you got a failing electronic part inside or the monitor cable. ... Computer Monitors

I HAV A TOSHIBA A-135 LAPTOP, THE SCREEN WENT DARK, AND WOULD ONLY LIGHT UP ON BOOT UP ( FOR 2 MINUTES) AND THEN GO DARK. IT WOULD LIGHT UP OUT OF SLEEP MODE FOR THE SAME (2 MINUTES). I HAVE REPLACED THE INVERTER, AND THE BACKLIGHT. STILL DARK, I HAVE CONNECTED THE EXTERNAL VIDEO CABLE TO ANOTHER SCREEN, WORKS FINE, THERE IS NO SWITCH, ONLY A MAGNET AT THE TOP LEFT HAND CORNER, NOW WHAT ?


There are steps to 'change' the visual effects of the "Display." 1. Right click on "Desktop", click Personalize, click, Display Settings. ... Toshiba Satellite A135-S2386 Notebook

I have 2 ibm thinkpads t40, on one of the systems the lcd inverter and screen get no power but when i take the lcd and connect it to the 2nd ibm tkpad it works fine, What would be wrong with the one lap top that the inverter wouldnt get power when the colling fan harddrive? again on one system base both lcds work fine, when i connect them to the seconf base the base turns on harddrive works and fan spins but no power to inverter board. how can i fix this


On the second Thinkpad laptop, that doesn't show a display with an LCD screen. Plug a VGA monitor into the VGA port on the back of the laptop. Hold the Fn key down, tap once on the F7 key (Toggle your display over to an external monitor) ... IBM ThinkPad T40 2373 Notebook

Dell E228WFP Monitor failure


To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

Monitor goes dark after a few seconds from power-up


... Dell E153FP 15" LCD Monitor

Optiquest Q9 After about 14 months, my 19" LCD Optiquest Q9 monitor suddenly got very dark ( the bottom 1/4 was still viewable, though dark) and then went blank. After it cools for a while I can power it back up with the same results. There is a faint click when it goes black. I have replaced it with another 19" LCD ( different MFG.) which is working fine, but hate to throw this one away if it is repairable. The screen itself seems fine with no pixels missing at the time it went dark. There are


I had this problem with my Q9 and I was glad to find the FixYa website with help. But I will offer more detailed info for novices to make sure you find the capacitors. First of all, it is not easy trying to find out how to open the monitor up! First, ... ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

I have a Sony Viao NS10E, all working fine and then the screen went dark, took screen out and put in an other laptop and it worked fine, put the screen from the other laptop in mine and still dark. The screen is dark and you can see desktop images in the background, can u help


You definitely have a Video Card Error related.\015\012\015\012Find Where Your Graphic Card located (asuming your computer has a separate card for video .\015\012 ... Sony VAIO PCV-W20 PC Desktop

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

I want to connect a Ultrasharp 1907 FPt monitor to my Dell inspiron. I have a power cable and also one from monitor to lappy, do I need a driver?


Most monitors now-a-day are pnp or upnp (Plug-n-play or Universal Pug-n-Play) So drivers are not always needed. In windows open control panel and then display then screen resolution. This will allow you to choose whether to use you laptop monitor or ... Dell UltraSharp 1907FP 19" LCD Monitor

Monitor goes dark after a few seconds


It looks like the video driver needs to be chcked. can you try to go to the bios of your omputer by pressing f2 on boot and let it stay there for 5 minutes? if it still goes to a black screen, its either your video card or lcd thats having a problem. ... Gateway HD2200 LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9860 seconds