Having problems with your PC Desktops ?

Change modem default ip address - conflicts with other routers

\015 Can you change the default ip on the motorola 5101 cable modem from 192.168.100.1 to perhaps 192.168.101.1?\015

Answers :

The motorola cable modem ip address cannot be changed
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Why wont my hp connect to my home wireless - HP Pavilion ze4400 Notebook


\015\012There are a few things you can do to help reliability\015\012You should first make sure that the modem and router are individually \015\012set up correctly.\015\012I do have a guide for that.\015\012Once that is ... HP Pavilion ze4400 Notebook

Change modem default ip address - conflicts with other routers


The motorola cable modem ip address cannot be changed ... PC Desktops

Netgear Rangemax Router not supported/can't find wireless networks after first time it logged on.


Lets do it again...1. Check physical connections. a. Connect the modem to the Internet port of the router. The Internet “i” LED on the front of the router should light up. b. Connect the computer to one of th ... HP Pavilion dv8000t Notebook

Power I shut down the laptop saw it logging off but when the screen turned black the power button and the HDD button is still active. I waited and waited for the lights to go off but it didn't. I closed the laptop and after a while opened it and still everything's on. what seems to be the problem and what do i do? Thank you.


1.\015\012\015\012 \015\012\015\012\015\012.\015\012\015\012\015\012Connect your wireless router\015\012Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.\015 ... Acer Aspire 5100 Notebook

Can not connect to my wireless router - HP Pavilion dv9000z Notebook


1. Choose your wireless equipment\015\012The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wi ... HP Pavilion dv9000z Notebook

I am trying to set up a belkin wireless g router (802.11g) to my cable modem. i have followed the manual and the installation software. the router seems to connect and configure itself successfully but it can not locate a internet signal. please could you help?


Most likely you need to change the IP address of the routher because your cable modem uses 192.168.1.1 which is the default for many routers. So either use the disk that came with your router or login to your router and change it to 192.168.2.1. Th ... PC Desktops

Wireless Connectivity lost


Greetings Roxie\015\012Are you using XP or Vista? \015\012\015\012The default ip address for a Netgear 192.168.0.1 - the default user is 'admin' and the default password is 'password'. Is it possible for you to run an ethernet c ... Dell Dimension 8200 PC Desktop

My Belkin 4 port router has the same IP as my Modem so my router will not detect my DSL connection. Ive asked Belkin for help but all they send me is gobblygoop!


Hi!\015\012I'm sorry to hear that Belkin did not help you with your problem. Let me help you with your concern instead.\015\012\015\012Here's what we need to do: \015\012\015\012Start by resetting the router to factory d ... Belkin PC Desktops

I cant get virgin netgear router to connect to my medion laptop, i get to the last part of the installation process when it says attempting to connect to newtork and it comes up move your connections closer together etc...the internet is working ok when i connect from modem with the ethernet cable


Have you accessed and setup your wireless part of the modem?\015\012\015\012To access the router settings menu, you will first need to log into the Wireless router following the steps below:\015\012Open Internet E ... PC Desktops

I HAVE A SHARP PC-GP10-CM MODEL THAT I WANT TO CONNET TO THE INTERNET WIRELESS, HOW DO I GO ABOUT IT PLEASE HELP.


First you need to sign up with an Internet Service Provider than can provide a broadband connection wirh DSL (ADSL in Australia) or a cable connection together with a wireless router with a built-in DSL or cable modem. Alternately a wireless ro ... Sharp PC Laptops

My wireless modem is not working - Compaq Presario Notebook


3.Configure your wireless router\015\012Using the network cable that came with your wireless router, you should temporarily connect your computer to one of the open network ports on your wireless router (any port that isn't labeled Internet, WA ... Compaq Presario Notebook

Have second hand dlink dsl502t modem am trying to access modem to change settings. the modem is unsupported by my isp but they have told me it will work but i need to access the modem and enter my user name and password. i have tried the address 10.1.1.1 but in order to get there i need a username and password. i have entered mine and the previous owners details but still no access. is there any other way to access the modem?.


Open a web browser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 192.168.1.1You see a box asking for your use ... PC Desktops

I'm replacing a Linksys BEFW11S4 router with a newer Linksys model WRT160N. What do I need to do to uninstall the old one, if anything. Do I need to delete all my current connections? Thanks, Mike


It should not require any changes - since you're going from Linksys to Linksys, the IP address of the router is the same (I believe). So shut down your computer (one with a wired connection to the router!), unplug the old router, unplug your modem, p ... PC Desktops

XP wont connect to internet through Sky Sagem Router


NO Internet\015\012· reinstall drivers first including the network adapters.\015\012· ... PC Desktops

Want to axcess modem and router to check settings


Well a cable modem is always on and requires no username or password. So that's not a problem. The linksys router, unless you changed it, will have a web address of http://192.168.1.1 ... PC Desktops

I have netgear wpn824 wireless router and it works fine until I try to connect to my work server through their Sonicwall VPN. If I unplug the netgear and go straight into my computer through the DSL modem then I have now problems connecting to the VPN. Help please


Two routers on two different sets of internal IP addresses will cause all kinds of conflicts. A VPN router is even worse. VPNs (virtual private networks) are designed to create encrypted tunnels between two computers. The computer its set to conne ... PC Desktops

I have Verizon Fios install in my home. I use to have Comcast. This is the situation, before the Fios my linksys wireless router was connected directly to a modem. Now my linksys wireless router is connected to the Verizon wireless router/modem. The problem I am having is this, my linksys wireless router is still transmitting and the new Verizon router is also transmitting. I can connect to both but only the Verizon wireless router seem to be working. The linksys wireless router, even though I c


Your IP address for you linksys router needs to be changed.  More than likely there using the same IP address such as 192.168.0.1.\015\012\015\012You have to convert your linksys router to a switch and change the IP address range it uses t ... PC Desktops

No internet access with wireless


Hi,First of all check the DSL cable must be in WAN port of the linksys router. if it is done then do the following.Actually DSL modem and Linksys router are conflicting with their IP class. Means DSL and Linksys routers are us ... HP Pavilion dv6000z Notebook

Hi my router wont connect to comp.need help making connection between router and computer


Here's How:\015\012\015\012Choose a convenient location to\015\012begin installing your router such as an open floor space or table. This\015\012does not need to be the permanent location of the device. Particularly\015\01 ... PC Desktops

I have wireless router connected to a wired router in order to connect one of my computers to cox cable. Works great, but when I try to hook my Tivos (I have 2) to the wireless router they can't find Linksys router (both the wired and wired routers are Linksys) Can you help me. C. Greene


Hi blanca,to resolve your issue, you have to cascade the routers properly. NOTE:Before you connect a Linksys router to another, make sure that bothhave different IP addresses. This is mandatory because both route ... PC Desktops

We just purchased a new Belkin Router and we can't get on line using it. Can you help us?


Try this also \015\012 \015\0121 Make sure your modem is connected to the WAN port on your router\015\012 \015\0122 unp ... Belkin PC Desktops

How do you repair an IP address conflict? I have a wireless network system in my house along with a wireless printer. The IP address on the printer keeps changing and we're either loosing our connection to the internet while we're on or can't get on at all without going through the whole repair process for the wireless connection. Yet the signal strength is usually excellent. I do not have a secure network. I didn't know how to set it up.


First off you need to SECURE YOUR NETWORK!!! An open network could allow people in your neighborhood to gain entry into your personal files and use your IP Address to look at things on the web that could get you in trouble. Everything they look at wi ... Averatec 6200H Notebook

I have recently installed Netgear Wireless G Modem Router DG 834G but failed to select the path to encrypt my contacts with the internet - in other words I am a bit insecure. How do I change this please?


Type in the routers sign in address in the address bar and you can open up the admin page. If I remember correctly, the url is http://www.routerlogin.net/ or ... PC Desktops

Hi,could some one walk me through setting up my Billion modem wirelessly to my Dell Desk top running XP home. I get confused with firewalls,LAN settings etc Ethernet cable is being used at the moment. Do you need drivers etc


I am not familliar with that brand, so I do not know if it is a cable/dsl modem, a router, or a combination of the 2. I will assume it is the cable or dsl modem since you said modem.The thing we need to do first is give you a basic unders ... Dell PC Desktops

I need to change the modulation type on my modem to select g.dmt to make my internet connection more stable HELPPPPP!! i have NO clue how to do it. it's an ADSL 2+router DSL 504T.i am computer illiterate,but my internet provider doesn't seem to get that :)


To configure the modem You will need to use the cd provided.ftp://files.dlink.com.au/products/DSL-504T-GenII/ ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4503 seconds