Having problems with your PC Desktops ?

Jumpers guide Maxtor 2B020H1 20Gb Slim IDE 3.5'' Hard Drive

\015 Jumpers guide master & slaved 4 two drives\015

Answers :

Maxtor jumper as follow:
\015\012looking at the connector top row 5 pins, buttom row 4 pins.
\015\012the single pin on the top row is index pin.
\015\012master jumper is located between top 2nd pin and 1st buttom, counting from the left.
\015\012slave has no jumper on any of the pins.
\015\012cable select jumper is located between top 4th and buttom 3rd pin. counting from the left.
Samsung sch w259cjarging jumper
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Jumpers guide Maxtor 2B020H1 20Gb Slim IDE 3.5'' Hard Drive

Maxtor jumper as follow:\015\012looking at the connector top row 5 pins, buttom row 4 pins.\015\012the single pin on the top row is index pin.\015\012master jumper is located between top 2nd pin and 1st buttom, counting from the lef ... PC Desktops

Dell Dimension 2400 - Adding second HD

I presume that the hard drives are ATA drives, and if the WD and Maxtor are installed on the same IDE cable then the boot drive, the WD HD needs to have the jumper set to Master or Master with Slave drive, and the Maxtor needs the jumper set to Slave ... Dell Dimension 2400 PC Desktop

Hard drive problem

Although I covered most of the ways to speed up Windows boot time in another article, I encountered a unique roadblock recently that made me write this article. During the last week I was asked by a customer to upgrade one of their office ... PC Desktops

New larger hard drive can only be detected as Primary Slave

Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self ... PC Desktops

New HDD Install Prob

Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Old HD to a "new" PC

I had the same problem hector, I don't know if you figured it out yet, but you can't have a hard drive and an optical drive (dvd/cd/ect..) on the same IDE cable. It just won't work, the only explanation I've heard that made much sense to me was that ... Gateway GT5408 PC Desktop

I want to replace the hard drive. I have the new hard drive but I am unsure how to procede

The 13 Easy Steps to Installing a Primary Hard Drive\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012Compiled By Our Editors\015\012 Believe \015\012 it or not, all it takes is less than a ... PC Desktops

Reloading windows xp

Replacement Drive? If you are talking about a Hard Drive the answer is: You can buy any hard drive as long as it is the same type from any computer store. Take your Hard Drive to the store and tell the sales person that you want another hard drive ... Dell Dimension 4600 PC Desktop

ATA HDD on IDE connector with a SATA drive on a SATA connector?

Yes you can do this but rather that buy a sata II hdd just buy a sata hdd. Might even be a little cheaper. Once you install go into the system bios & enable the sata drive. Hope this helps & please remember to rate my answer. Thanks. ... HP Compaq d530 PC Desktop

Installation of a 2nd hard drive steps & tips

Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

I'm having a good bit of computer problems and its killin me

At firs enter bios and find if really is presented your hard drivers. It may went out. If you are familiar to jumpers find master hard drive (if they are IDE and unpug and try power on if the same problem then try other one unpug and first plug. with ... PC Desktops

Hi i have a 10.1gb Maxtor model 31024H1 IDE hard drive and i need the jumper setting for slave

Slave is NO jumpers at all \015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012(Master) - The vertical jumper over the J50 pins is configuring the drive as a Master. The horizontal jumper over the J48 and J46 pins ... PC Desktops

Installed a new Optical Drive and require assistance in the wiring

What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

What hard drive will work with my NEC PowerMate 5250?

You would need to get the manual for this computer as the manual should state in it what type of hard drive it supports in terms of capacity and what connector types it needs ie IDE or SATA ?Also are there any bios updates for this comput ... NEC PowerMate 5250 PC Desktop

Trying to add another internal hard drive to Dell Dimension 3000

Leave the cable connection as it is. That is, one ribbon cable for the 2 dvd drives and the original cable for the old hard drive. You dont need to set the jumper on the second hdd. It has to be set to 'cable select'. Then make sure to connect the se ... Dell Dimension 3000® Pentium® 4 2.8GHz, 256MB, 80GB, 48x CD-RW PC Desktop

Gigabyte 8S648FX-RZ Motherboard has problems running multiple IDE devices

Ok, you have 2 x UDMA ATA 133/100/66 Bus Master IDE ports on that motherboard, so you can support 4 ide devices. It is important that you split your devices between the 2 available ide channels (each channel has a seperate ribbon cable). For exampl ... PC Desktops

Lost manual I have misplaced my manual for my 150GB hard drive can you help please Thanks Frank

You didn't mention a name so I will shoot in the dark to try to help...if your computer doesn't recognize the hard drive that is because it is not formatted yet. If it is an IDE hard drive make sure the jumpers on the end of the drive are set t ... PC Desktops

How many hard frives can be installed

You can put as many drives as you can fit as long as you have the cables and connection. Usually 4 is the max in a computer, but you can by a SCSI IDE card and add even more. The biggest problem is to make sure that the jumpers are set to slave on ... Dell Dimension 4600 PC Desktop

Maxtor Installl problem

If its an IDE internal drive:\015\012\015\012it may be that you have not set the drive up via the jumpers on the rear of the drive, \015\012\015\012if it is your second drive and you have it on the same data ribbo ... PC Desktops

Cannot get 2 IDE devices to show in bios.

Does the computer have two IDE channels? If so set the Maxtor HDD as master on the primary channel and the DVD drive as master on the secondary channel. Also right click on My Computer, left click on Manage and left click on Disk Management and see i ... Dell OptiPlex GX280 PC Desktop

Sata as boot and install eide drive as d:or e:

You can slave the EIDE hard drive off of the CD Drive, as long has it is also EIDE. There should be a flat grey ribbon cable plugged into the back of your CD Drive. That IDE ribbon cable should have 2 connectors on it, one of them should be plugged ... PC Desktops

Two Maxtor hard drives - Master 6Y080L0 and Slave 6K040L0 Jumper set as Master for the 80 and no jumper for the 40. These are the identical settings shown printed on both drives. I beleive the cable/ribbon is an 80 and it is connected to the Blue No.1 IDE socket on the ASRock Motherboard. Cable/ribbon connected - end to the Master (80) and middle to the Slave (40). This is recognised by the system BIOS etc and drives work correctly. Have also tested connection using jumpers for Cable Select w

Essential you have one license allowed and it checks the primary HD via its 'utilities function', and only does a general scan of slave. Since you did not mention Norton version nor your OS general assist here. You might consider going into Options ... PC Desktops

Hard drive is not working, waspurched one year ago.

This issue has many various factors on why a hard drive doesn't work the way it should be. Let's discuss it one by one:First, ensure that all the cables ( SATA/PATA )are properly seated or attached to your MOBO. If the cables were check ... PC Desktops

I have a blue screen on my DELL Inspiron 6000 with message UNMOUTABLE_BOOT_VOLUME

Assuming you have a windows xp disc you would insert the xp disc and boot from the xp disc as though you are going to re install but when you get to the options select to go to recovery console / recovery mode and then use the following commands ... PC Desktops

CD drive is not recognized

Step 1: Checking for CD/DVD drive in BIOS Make sure the drive appears in Setup. The drive has to be detected in the Basic Input/Output System (BIOS) before Windows can see the drive. Check for detection as follows: 1.Turn on ... PC Laptops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6122 seconds