Having problems with your PC Desktops ?

Can I use a WD1600 as slave drive and Maxtor 6Y200P0 as master? If I can what are setting on Wd1600.


Answers :

You just need to put a jumper on the pins on the side of the hard drive that is marked on the label to SLAVE, then connect it to the ribbon and power.
\015\012
\015\012See document below for extra help:
\015\012
\015\012http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=ata_jumper_settings&vgnextoid=cbc974850ce0e010VgnVCM100000dd04090aRCRD
I havent read it but here is the linkhttp://www.techspot.com/vb/topic126243.html

please rate my assistance
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell Dimension 2400 - Adding second HD


I presume that the hard drives are ATA drives, and if the WD and Maxtor are installed on the same IDE cable then the boot drive, the WD HD needs to have the jumper set to Master or Master with Slave drive, and the Maxtor needs the jumper set to Slave ... Dell Dimension 2400 PC Desktop

New larger hard drive can only be detected as Primary Slave


Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self ... PC Desktops

Can I use a WD1600 as slave drive and Maxtor 6Y200P0 as master? If I can what are setting on Wd1600.


You just need to put a jumper on the pins on the side of the hard drive that is marked on the label to SLAVE, then connect it to the ribbon and power.\015\012\015\012See document below for extra help:\015\012\015\012 ... PC Desktops

Drive failed to boot up next time it was turned on have tried conncting as a slave computer recognises drive but say its 138mg when its 40gig, and there is nothing showing on the drive! have tired running Seatools for windows and all the test say there are no problems with the drive. I have in stall a nerw 250gig drive (Seagate) with NTFS file system and the problem one is a Maxtor with fat file system .


Hi silverend,I have some questions and some recommendations for you...The original problem of the system not booting might have been temporarily compounded by moving it to a different system as a secondary or slave disk. You' ... PC Desktops

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

Hard drive problem


Although I covered most of the ways to speed up Windows boot time in another article, I encountered a unique roadblock recently that made me write this article. During the last week I was asked by a customer to upgrade one of their office ... PC Desktops

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below


Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory


I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

Installation of a 2nd hard drive steps & tips


Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

Two Maxtor hard drives - Master 6Y080L0 and Slave 6K040L0 Jumper set as Master for the 80 and no jumper for the 40. These are the identical settings shown printed on both drives. I beleive the cable/ribbon is an 80 and it is connected to the Blue No.1 IDE socket on the ASRock Motherboard. Cable/ribbon connected - end to the Master (80) and middle to the Slave (40). This is recognised by the system BIOS etc and drives work correctly. Have also tested connection using jumpers for Cable Select w


Essential you have one license allowed and it checks the primary HD via its 'utilities function', and only does a general scan of slave. Since you did not mention Norton version nor your OS general assist here. You might consider going into Options ... PC Desktops

CD drive is not recognized


Step 1: Checking for CD/DVD drive in BIOS Make sure the drive appears in Setup. The drive has to be detected in the Basic Input/Output System (BIOS) before Windows can see the drive. Check for detection as follows: 1.Turn on ... PC Laptops

Code 39 i av a acer aspire 7720 my pioneer dvd-rw k17rs ata as stopped work and gives code 39. help


.Turn on the PC. When the HP/Compaq logo screen appears, press the F1 key repeatedly until the BIOS Setup screen appears (on some models this key press may different, F2 or Del) 2.Use the Left and Right Arrow keys to select Main. 3.The ha ... PC Laptops

Dvd rom won't work


You forgot to check the jumper settings of the Hard Disk and the DVD Drive found at the back near the IDE and power cables. If you are using one IDE cable, then one jumper should be a Master, that's the Harddisk, and the DVD drive a Slave. If you are ... Compaq Presario 5000 PC Desktop

Reloading windows xp


Replacement Drive? If you are talking about a Hard Drive the answer is: You can buy any hard drive as long as it is the same type from any computer store. Take your Hard Drive to the store and tell the sales person that you want another hard drive ... Dell Dimension 4600 PC Desktop

Computer does not see hard drive or cd rom


Did you change the cable that went to the hard drive, and is it the correct type? (ie ATA 133) ... Dell OptiPlex GX260 PC Desktop

How to install a second dvd player in my compaq


The computer needs to be opened up to properly install the CD or DVD drive into the computer. The method for opening the case will vary depending upon the case. Most new systems will use a panel or door on the side of the system while older systems m ... Compaq PC Desktops

My cd-roms work seperstely but not as a pair. The small 3-prong hookup wire is not connected to anything


By 'work' are you referring to loading software, being able to see the drive in windows and find/access files on the drive,... or are you referring only to playing cd music directly from the drive(s). Most likely the 3 conductor wire you are referri ... Compaq Presario 5000 PC Desktop

I have a dell dimension4700, trying to replace the hard drive.


Ata is a big flat cable whereas sata is a newer thin flat cable. it really depend on your motherboard and if it accepts them. if you could plug it in then it means that it accepts the connection. you can use any harddrive as long as it has the ata or ... Dell Dimension 4700 PC Desktop

How to install second internal hard drive


Yes, you can use, Please see label attached to the harddrive for a jumper setting to become primary harddrive.\015\012\015\012in the DVD rom there's also a label on it. but the most common setting is slave is in the center.\015\012 ... Acer Aspire™ T180 PC Desktop

Sata as boot and install eide drive as d:or e:


You can slave the EIDE hard drive off of the CD Drive, as long has it is also EIDE. There should be a flat grey ribbon cable plugged into the back of your CD Drive. That IDE ribbon cable should have 2 connectors on it, one of them should be plugged ... PC Desktops

Cannot Boot up Computer: sends me to the bio screens


I presume you know how to get into the BIOS, but you don't say if this is a new drive being replaced or a second drive being added etc., but I'm guessing that you don't have the drive configured correctly. There are three jumper positions on most ... Sony VAIO PCV-RS530G PC Desktop

Installing dvd drive


When you connect two drives to a IDE cable, one of the must be 'master' and one 'slave', whichever is master will show up first and slave will be second.If you're only using one drive, it needs to be set for 'single', (which may or may no ... Systemax AOL Optimized PC (100607) PC Desktop

Bios Fail to detect Local Disk C and DVD-RW - Computer Speakers


I'm going to make an assumption here and guess that you have both hard drive and cdrom plugged into the same IDE cable. I think you have either 2 masters or 2 slaves and that is why the bios can't see them. On any one cable you can have a master and ... Computer Speakers

My hard drive is not being noticed - E-Machines eMachines Desktop PC


You need to provide more info, what kind of PC is it in, what OS, is the drive showing up in the BIOS at all, what brand of HD is it, is it going in as a slave drive or master, are you going to boot from it, IDE or sata. if its ide check the jumper s ... E-Machines eMachines Desktop PC

Can I add an additional internal hard drive? - HP Pavilion a350n PC Desktop


Hi,Yes, you can add additional hard drive.Please follow the below steps to add the drive sucessfully.STEP 1:Make sure you have room for an extra hard drive, here's one way to do this: 1. ... HP Pavilion a350n PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1429 seconds