Having problems with your PC Desktops ?

Monitor says no input signal

\015 I hooked up my Analog VGA cable and turn the computer on. The ICONS come on for less than a second and a message says Analog then no input signal. To make this work do I need to buy a DIGITAL DVI cable and use it?\015

Answers :

Do the icons look ok when you can see them? It sounds like your resolution may be way too high for the monitor. It loses sync and blanks the screen rather than show a lot of mess.
\015\012
\015\012Boot your windows in safe mode (tap F8 before it gives you the progress bar.. just keep tapping it until you get a boot menu)
\015\012
\015\012Everything should look big, but the monitor shouldn't cut out. Go to your display properties and set it to the lowest setting. (even if you can't move the slider, just click it once) Then OK and restart.
\015\012
\015\012If that works, you should be in normal Windows with a horrible resolution. Go back to display settings and set it ONE STEP higher. Apply and have a look. If it's good, go another step, and repeat.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor says no input signal what do i do?


The video card or videl cable or monitor could be faulty.\015\012Connect a different monitor to the computer, if you get no input signal on this too then the video card is faulty. Reseat the video card and test again, if still no good then repl ... Dell Dimension 4100 (-JM0TB01) PC Desktop

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

Input Signal Out of Range


I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor

Plug the monitor into computer, the monitor says "no signal input


... Gateway FPD 1730 17 in. Flat Panel LCD Monitor

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Cpu says no input vga signal, then goes to sleep


The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. I ... HP GX613AA Pavilion A6300F Desktop PC

Monitor malfunction, says VGA Input: No Signal and goes to sleep


From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

Hp monitor cannot switch from DVI to VGA because of sleep mode


... HP Pavilion F1703 17" LCD Monitor

My tower wont turn off and monitor says no input signal and keyboard doesnt work


Do you have two video outputs on your PC ie. one on the motherboard adn a separately installed card maybe? If you do you need to set the BIOS so that it uses the AGP/PCIE video card and not the 'onboard'. Try the onbopard vodeo card first to see if y ... HP Pavilion a1610n PC Desktop

W17e says "input not supported"


Hi - here's what I found about your wide screen monitor:The HP Pavilion w17e LCD wide-screen monitor has the following features:\015\012 \015\012\015\0121440 x 900 factory-set resolutio ... Acer AL1916W 19" LCD Monitor

Sony Monitor says "No Input Signal, switch to Power Save"


Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Monitor status - no input signal. What does this


The problem might be coming from your video card or try changing your RAM ... HP Computer Monitors

I've been trying to use s-video cable to connect


\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

Screen shows message "no input signal" and monitor goes to sleep.


Monitor show "no input singnal" error masage when not gating any type of video singnal ,\015\012so if u realy check your monitor wires for correctty plugged in . \015\012then:- Two possibilities:\015\012either the ... HP vp17 Monitor

Graphics card stopped working in pci-express slot, monitor says "no input signal", plugged monitor into onboard graphics vga and runs ok. brought new card and fitted in pci-express slot but monitor still says "no input signal" pc is hp pavilion slimline s3040.uk, onboard graphics chipset isnvidia GeForce 6150le, new card is nvidia GeForce 8400gs. I have replaced dvi/vga adaptor and checked pci-e is selected in startup. any ideas?


... PC Desktops

Moved computer & monitor and now monitor keeps saying no input signal and goes into sleep mode


... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor says no input signal


Do the icons look ok when you can see them? It sounds like your resolution may be way too high for the monitor. It loses sync and blanks the screen rather than show a lot of mess.\015\012\015\012Boot your windows in safe mode (tap F8 befo ... PC Desktops

Fujitsu-Siemens P15 TFT power/picture problem. it take time to turn on.


It does indeed sounds like the capacitors, I had this problem last year with a Medion monitor where it would turn on and off, when I spoke to Medion they did say that it would need a repair but at the time I wasn't enclined to pay the repair fees for ... Fujitsu Siemens Premium Line P15-1 15" LCD Monitor

No Input Signal


Dont Panic it is Nothing...\015\012Your Monitor is safe...\015\012If it say "no Input signal" - "Check VGA cable"\015\012\015\012it means that the Monitor is finding signals from the computer,and the cable is either not connec ... Chi Mei Corporation 221A Monitor

RGB No Signal Message


First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then ... Gateway FPD1975W 19" LCD Monitor

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

Hp w1907 monitor not detecting vgi input from original HP x3122 computer


It sounds like your computer has been having some trouble for some time. My hunch is that there is nothing wrong with the monitor at all.\015\012\015\012Usually, when you see this warning on the screen that there is no signal, the monito ... HP Pavilion Slimline S3123W Desktop PC - REFURBISHED

Black screen with message about no input signal


Might be something wrong with your monitor's data cable ... Sony SDM-HS95P/B 19" LCD Monitor

No composite input signal


`Hi,\015\012 If the monitor is making the noise , the monitor circuit baord has gone bad.\015\012If you have purchased the monitor on a seprate order from dell it would be covered under 3 yr warranty. If the same has been bought with th ... Dell UltraSharp 1907FP 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5543 seconds