Having problems with your PC Desktops ?

Pentium 2.4 ghz cpu not work with d945 gdal mother board but work with another mother board(cpu and mother board are ok)

Answers :

Sometimes motherboards require bios updates to work with newer processors
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pentium 2.4 ghz cpu not work with d945 gdal mother board but work with another mother board(cpu and mother board are ok)

Sometimes motherboards require bios updates to work with newer processors ... PC Desktops

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory

I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below

Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

I have a compaq laptop its dead, i want the mother board diagram

Motherboard diagram? Is this to trace where the power comes in to the motherboard?The Compaq Presario M2000 Series Notebook PC's, use a separate Power Board. A small, rectangular circuit board, that plugs into the mainboard. (Motherboard) ... Compaq Presario M2000 Notebook

New Motherboard for Sony VAIO-RX550

I just bought the same box, mostly for the case, power supply, etc, to use as a small server.\015\012Three ARE 2 ram slots, but this motherborad IS limited to 512mb total. And it uses SDRAMM PC133 or 100, not SO DIMM - incompatible. PC133 SDR ... Sony VAIO Digital Studio PCV-RX550 PC Desktop

Moniter Screen Blank when my PC start....Giga byte 8S661FXME-RZ Mother board

Try to remove the motherboard from the casing and see it if the have\015\012some capacitors or any circuit distroy. use other mother board for\015\012testing chek your hardware one by one maybe some of your hardware\015\012devices damages. ... PC Desktops

My Computer will not work fans did work but have also now stopped

Hello,\015\012\015\012You may want to make sure that both the atx connector and the additional 4pin p4 connector are tight. Also, either tighten or remove all expansion cards because one could be loose or bad. You may also try re ... HP Pavilion a305w (DM181AR) PC Desktop

Hardware upgrade required for autocad 2009

Your existing CPU will not work with that motherboard. The AM2+/AM2 processor slot is for AMD processors only. For this motherboard, you will need one of the following processors: Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 ... Dell Dimension 8250 PC Desktop

Solid amber light on front amber on mother board

Hello, take the PSU (Power Supply Unit) from a known working computer, preferable to be the same model and test with it. when you do so make sure you disconnect any peripherals e.g ( Printer, CD-ROM, Floppy).Look closely at the memo ... Dell OptiPlex GX280 PC Desktop

Acer AM5641-U5520A will not

If you removed the memory modules and there is no change then I would start disconnecting one device at a time to see if that is causing the problem. Start by disconnecting the cd/dvd rom and then try booting the computer. Then try disconnecting any ... Acer AM5641-B5560A Desktop PC & Monitor BUNDLE

No start up , button lites up - cd-rom wont open , noticed no fans on for 3d card or big one on mother board

If the cpu/heatsink fan isn't turning then most pc's will shut down to avoid further damage to cpu & board. I would first replace the fan if it's the one over your cpu. Try replacing power supply. If your board has the 4 ... E-Machines eMachines Desktop PC

IBM Mother board mlack out

Just buy another power supply with a higher power for the problem is not on your computer but on the power supply,then try to plug it in a 220v voltage regulator,but i surely recommend that you'll buy a new power supply ok ... IBM 486DX 80486 (32G4144) Processor Board

EMachine Model T3828 No power

Greetings! As the first answer suggests, you must be comfortable taking things apart. I've actually just finished diagnosing the same problem on a customer's computer, and Here's what I did.First, I remove the power plug, open up the co ... E-Machines eMachines T3830 PC Desktop

No Beep, No LED Read-out just - -

Sounds like you have pretty much covered about everything. Are you saying that the system works OK, except when you try to get to BIOS, or is it not working at all?If you are just having trouble getting into BIOS, there is the possibilit ... PC Desktops

My computer stopped working

The screen might be broken because thats what happened to me and i got a new screen and it worked again try and do that or get a new mother board because if *********** board dosent work certin things on your computer wont work ... HP Pavilion dv6000z Notebook

Dell latitude D600 CPU issue

Is Speedstep installed? This is a utility that adjust the clocking of the CPU. If it is not installed, you can download it from the Dell support site. After you install it, run it and set it to max performance when plugged in to AC power. The st ... Dell Latitude D600 Notebook

Cannot get new Motherboard to boot up in Normal Mode

What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Upgrading IBM ThinkPad T20 Intel Pentium III to Intel Pentium 4

Patrick, I'm glad to see your enthusiasm to explore and expand on your computer knowledge. Unfortunately I have to be the first to let you know that in this case your ideas on upgrading your systems by simply changing the processors just won't work. ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor


I was wondering if this person helped you ... Gateway 310 S PC Desktop

Bios problem Power On Self Test (POST) Beep Codes and Bios Error Messages

Standard Original IBM POST Error Codes1 short beep\011Normal POST - system is ok2 short beeps\011POST Error - error code shown on screenNo beep\011Power supply or system board problemContinuous beep\011Power supply, system board, or ... PC Desktops

I have an old hp desktop 8570c. I tried using a product called a ''Tornado'' to transfer files to another computer. It didn't work. Now when I plug in my computer (hp 8570C), it simply runs with the busy light on. Hooking it up to a monitor gives me only a black screen. I've tried using the keyboard functions but can't get anything on the screen. The computer will not hard shut down by holding the button and simply unplugging it and plugging it back in gives me the same result...running but with

You can open the CPU and shut down by removing and shorting the wires in the mother board ...\015\012wen u open it (cpu) ,u find wires runnnig frm led to ur mother board (some 2 pin connectors ,generally its written on the wires ).....unplug dat wire ... PC Desktops

White lines going across the screen - PC Desktops

THere are two possibilities\015\0121. problem in mother board\015\0122. problem in monitor\015\012\015\012To make sure if possible connect your CPU to another monitor and see if all is fine. If the other monitor works fine, th ... PC Desktops

Satelite pro 4200 Fan does not work although I have being replaced it

Have you tryed getting a cpu fan that connects stright to the power supply d type connector, might be an idea to try. does the pc boot up , out of curiosty. sounds like a duff conector on the mother board if it does. look on the mother board there m ... Toshiba PC Desktops

I have been having some boot problems into windows with my p4s800 mx motherboard. I have purchased it with a 3,0 ghz cpu and put it together yesterday, after which I tried to boot it. It works on lets say 6/9 times, but the 4/9 times it wont boot into windows. After the boot failure, the system automatically gets into bios and tells me that the ''system hung'' and that I should adjust the frequency of my CPU. I am currently not overclocking the system and have the same problem when I try the 1,5

The BIOS utility probably has a setting for the BIOS to automatically detect and maintain your CPU's clock speed. Make sure that is ON or ENABLED. Another probable reason for the failure may be your RAM settings. Again, use the automatic detection ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9412 seconds