Having problems with your PC Desktops ?
IBM M51 ThinkCentre doesn t recognize 4gig installed memory
\015 ''IBM M51 ThinkCentre doesn t recognize 4gig installed memory''My Computer Properties only shows 3gig of installed memory although 4gig installed. System Information file shows 4gig. How do I determine if all 4gig utilized?\015
You can confirm this in the BIOS and i'm sure it will show 4GIG. Your Operating system maybe a 32 BIT OS, hence it will only show about 3... GIG. It's a limitation for a 32 BIT OS.
Repair Help & Product Troubleshooting for PC Desktops
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
IBM M51 ThinkCentre doesn t recognize 4gig installed memory
You can confirm this in the BIOS and i'm sure it will show 4GIG. Your Operating system maybe a 32 BIT OS, hence it will only show about 3... GIG. It's a limitation for a 32 BIT OS. ... PC Desktops
Ethernet, Multimedia, Video Controller is not recognized
IBM has the worst site I have seen so far for driver downloads. I have posted a link for you to go to IBM. You'll have to go through the downloads & find what you need. Like Lan drivers, audio drivers, video & so forth. You may find a restore ... IBM ThinkCentre A50p PC Desktop
How do I tell me emachine T5212 to recognize newly installed ram?
The Ram specifications for your model are: 1024MB DDR2 (2 × 512MB), 533MHz (PC4200)Expandable to 2GBIf you are using Microsoft Windows, the operating system will recognize the memory by itself, there is nothing you have ... eMachines T5212 PC Desktop
CD / DVD player not listed as device on Windows Explorer
Try physically removing the player and fire up the laptop. Power down the laptop, replace the player and power back up. If that doesn't help, see if BIOS recognizes it.If that doesn't work, get back to me.Ron- ... PC Laptops
Bios problem Power On Self Test (POST) Beep Codes and Bios Error Messages
Standard Original IBM POST Error Codes1 short beep\011Normal POST - system is ok2 short beeps\011POST Error - error code shown on screenNo beep\011Power supply or system board problemContinuous beep\011Power supply, system board, or ... PC Desktops
I have a Sony Vaio laptop and information I have checked tells me that I can Upgrade my memory from 2 254 cards to 2 512 cards, but when I install them the computer only recognizes on of the cards Is it just a bad card????
Go into the bios to see if it recognizes all 1024. If not, I would check the installation first. Remove one card and reboot the system to see if it recognizes the one, then remove that card and try the same thing with the other card in the other sl ... Sony VAIO PCG-K25 Notebook
SYSTEM DOESN'T RECOGNIZE NEW MEMORY MODULE
Memory modules must be the correct type and speed, and be within the specifications for the laptop. Just because it fits in the slot doesn't mean it will work.\015\012\015\012The Dell inspiron B130 has 2 slots. Each memory slot can hold D ... Dell Inspiron B130 Notebook
Regarding a IBM ThinkCentre 8183: I want to instal a new H Drive
Bit late with answering.. But the basic dvd drive in this IBM machine can only read DVD's not DVD-R or -RW ... IBM ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop
I downloaded the driver but it doesn't recognize
When you download the Tinkpad device drivers, they need to be the XP or Vista versions that match the Windows that is installed on your laptop.When you run the driver programs they will be unzipped/expanded to the hard drive in a folder c:\\dri ... IBM PC Laptops
Post codes I have an IBM Intellistaton Z Pro 6221 what when turned on now only has 3 long beeps that keeps repeating. I can't find what this post code is. Any suggestions?
Dely with this earlier today (else why would I be here?) I tracked the beep codes through the labyinthine IBM support and basically got no answer. This is what IBM said in the "Troubleshooting POST/Startup" manual Beep code 3-3- ... IBM IntelliStation Z Pro 6221 PC Desktop
I intend to install more 1 mega of memory, but motherboard not recognized it (one dimm 1gb pc3200 cl3 184-pin dimm). Of origin the PC it has been installing 2 dimms of 512 and I intend to add +1 dimm of 1GB.(what leaves one empty slot).
The memory may not be compatible depending on the speed. Try taking out all the memory and just installing the 1Gig stick.. does it work?\015\012\015\012If it does then the 1Gig stick is fine, but your PC probably doesn't like you mixing ... PC Desktops
My hp compaq nc6400 doesn't turn on. the green
Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook
Installed PNY 512 DDR PC2700 Optima memory, recommended by Staples. on to Toshiba P35 S609. System doesn't indicate that memory has increased. Type "chkdisk" into "run" message says doesn't recognize command.Upon first install system shut it self off every 5 seconds. After removng original and new memory and replacing system started and is slightly faster but shows only 512MG while should show 1024.
First of all it is good practice to have equal brand/model/specs memory boards when installed few of them. Also, you did not mention the bus speed of your PNY DDR, for P35 it should be 333MHz, so at least makesure both or DDR boards there have same s ... PC Laptops
USB ports don't recognize memory sticks or external harddrive.
If your using a usb hub or similiar, try connecting directly to the front or the back of your machine.Do you have another USB cable to try or is the usb connector directly on the USB device?Try these steps to reinitialize your us ... HP Computer Utilities & Maintenance
RAM Upgrade Acer ASE380-UD421A. It appears that when I use all 4 memory slots this falts the machine it beeps and won't start. Okay, the machine came with 2 - .5 gb memory boards and two other empty slots. I bought 2 - 1 gig PNY DDR2 memory boards. I put those into the empty slots for 3 Gbs of memory, the machine beeped and wouldn't start. I took the board in the slot 4 out and it worked, I had 2 gigs of memory. I put the two new boards in the first two slots and nothing in the 3rd and 4th slot,
How much memory your Windows OS will recognize depends on which version of Windows you are running. 32-bit versions of Windows will see (and utilize) only 3GB or 3.5GB. To utilize more memory, install a 64-bit version of your OS. More information abo ... IBM PC 350 PC Desktop
IBM thinkpad T23 2647 install help
Many lockups are caused by incorrect (wrong kind or too much) or faulty memory modules. If you are comfortable doing so, open the memory door on the bottom (most likely) of the PC after first unplugging the PC and removing the main battery. Verify, ... IBM ThinkPad T23 2647 Notebook
How to remove ibm thinkcentre p4 3.0 motherboard
This is the link to the IBM ThinkCentre S50-8183, Hardware and Maintenance Manual,http://www-307.ibm. ... IBM ThinkCentre S50 8183 - P4 3 GHz (8183D9U) PC Desktop
Adding memory, new total not recognized: IBM Thinkpad R51e-1844
Ram should always be paired. Same type, speed and size in each slot. You may have 1 SIMM/DIMM/DDR that has 2 sides of chips and the other with 1 which will do exactly what you state.\015\012\015\012RAM reads across the chips simultaneously. So if ... IBM ThinkPad R51 Notebook
Intel D845GLAD motherboard
This is indeed listed as a Memory error by Intel\015\012\015\0123 beeps = Base 64K memory failure\015\012\015\012the name of that probably doesn't say much to the average PC user, but for those of us who remember the good ole ... PC Desktops
Want to install 4Gb
Memory is a tricky thing you have to make sure that the meory is compatable with your mobo(for instance) my laptop is a acer aspire 3000 it takes pc2700 ddr memory that runs at 333 mhrtz i just upgraded from a 128 and 512 set to 2 gig im running xp h ... Acer Extensa 4620 Notebook
Installed memory I went to crucial.com and scanned my laptop and it said that i could upgrade my memory to 512mb on 2 slots so when i installed it and turn my computer on it wouldnt restart how do i get it to recognize the memory bc i put the old memory back and it stil works but with the new it turns the fans on but no picture or signs of the laptop being on PLEASE help
Make sure the new memory is the same as the old. Memory has a set frequency, this frequency matches the processor, so you can't just grab any memory and throw it in the machine and expect it to work. Memory will be rated as ... Compaq Presario 2575US Notebook
IBM netvista PIII type 6579 MNU doesn't boot
Sound like the memory is not compatable, try booting with no memory installed and see if the hard drive appears, if so it's a memory problem. ... PC Desktops
Front usbs not working(suddenly)
Possibilities:\015\0121) One of your USB devices have faulted, or is causing a resource conflict (or similar)-- Remove all USB devices, and reboot.\015\0122) Your USB chip/ports have been damaged.-- Find a spare HardDisk or ba ... PC Desktops
Doesn't recognise new memory modules
Try this; Install only one memory module at a time then check how much memory it will recognized. If it say 1 gb may be somehow the module is mislabel for the correct capacity. Then contact the seller for clarification. ... PC Desktops
Presently have 1 Ghz of memory on wife's HP Pavilion dv6626 us laptop, would like to install 4Gig of memory for more speed, but understand it is 32 bit machine and will only recognize 3 Ghz of memory but can I go ahead and install 2 x 2Ghz modules in place of the two 512 Mhz modules. Last question is the 2GB DDR2-667(PC2-5300)SO-DIMM module the correct ones to install. Thanks for any help. Bob Chaney at firstname.lastname@example.org
Hi,\015\012\015\012For dual-channel memory to work, both DIMMS must be of identical capacity and operating frequency\015\012\015\012just checking that you re-checked.\015\012\015\012thats the correct option you are ... PC Desktops