Having problems with your PC Desktops ?

Please can anyone help me i have recently upgraded my monitor from a xerox 19'' to a samsung 23'' syncmaster now with the monitor in standby i turn on my acer t180 and the green light in the on button dosent light up an the monitor wont detect a signal if i turn off both pc and monitor then turn the pc and then the monitor everything works fine in this pc i am running a xfx 9500 gt graphics card and have the latest drivers for the card and monitor so why should this be. i know its only a little


Answers :

I assume you are running windows. First off you need to boot into safe mode by pressing F5 repeatedly as soon as you start your computer. Select the option for safe mode. Once you are in then you need to go to the device manager. Click on the run option on your start button then type compmgmt.msc. Click on device manager on the left side. Then click on display adapters, select your graphics card by double clicking on it. Select the driver tab and uninstall the device. Once you do this reboot with the new monitor plugged in. The operating system should install plug and play hardware automatically. Then you can install the software afterwards once you logon on. Special note: you might have to do this with the old monitor first. Once you uninstall the display driver turn your machine off and connect the new monitor. I hope this helps.
Repair Help & Product Troubleshooting for PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

Problem w/Dell E176FPf monitor stuck in power save mode


Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

My 110v PC was plugged in 220v


There is no such thing as plugging something into 220v. That is the voltage at which your power supply will provide power to your computer. What you did was give your computer more power than it needed and you most likely burned out the mother boar ... E-Machines eMachines Desktop PC

DV8309 power up problem: blue lights on for few seconds then off


The inverter inside the lcd panel is most likely your problem. Try removing the whole lcd screen from the laptop if you are capable and run it with the external screen to confirm. leave the lcd switch off (this lcd switch above the power button turns ... HP PC Laptops

Monitor Turns Black


This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

Please can anyone help me i have recently upgraded my monitor from a xerox 19'' to a samsung 23'' syncmaster now with the monitor in standby i turn on my acer t180 and the green light in the on button dosent light up an the monitor wont detect a signal if i turn off both pc and monitor then turn the pc and then the monitor everything works fine in this pc i am running a xfx 9500 gt graphics card and have the latest drivers for the card and monitor so why should this be. i know its only a little


I assume you are running windows. First off you need to boot into safe mode by pressing F5 repeatedly as soon as you start your computer. Select the option for safe mode. Once you are in then you need to go to the device manager. Click on the run opt ... PC Desktops

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Screen light goes out but image is still viewable...


Hello..Now let's discuss what we\015\012should do when the laptop seems to be booting up without problems, the\015\012hard drive spins appropriately, and we even hear the welcome sound of\015\012the operating system, but we have no ... Sony VAIO Notebook

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

EMachine W3107 will not boot, no display.


Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

Power save mode


Try first, plug it into the pcs default video card if it is working. If screen works fine. Then we know it is something to do with the new video card. If so turn PC off unplug it till all power is off most pcs have a little light inside make sure it ... Dell SE198WFP LCD Monitor

Monitor will not turn on- was working fine a week ago!


... Acer AL1703 17" LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

My computer does not start up


Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Monitor will not turn on- was working fine a week ago!


... ViewSonic VA520 15" Flat Panel LCD Monitor

Monitor keeps blank even the power lLED is on green


Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor

NO DISPLAY :(


The resolution setting may have been in inadvertently change to one that your monitor does not support you mentioned that you have another monitor that does work with your computer what i would do is to set the video resolution to the lowest possible ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Nvidia Vetro Geforce 6800GT on E510? Need help setting up max displays MD 219 dual displays


... Max Displays MD-219 (Gray) 19 in. Flat Panel LCD Monitor

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

My hp compaq nc6400 doesn't turn on. the green


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1402 seconds