Having problems with your Computer Monitors ?

HP monitor goes black and asking for frequency settings


Answers :

If you see the initial boot screen until windows boots then you may have a setting for the refresh tate too high in Windows. Try starting in VGA safe Mode by hitting F8 during boot. Once there you go to control panel, Display, settings tab,Advanced and choose monitor. you'll see a refresh rate, try setting it to 60 or 70 and see if it works on reboot.
\015\012
\015\012Be sure to use the VGA option...its ugly during the session but will let you reset the rate.
\015\012Good Luck!
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Dell flat screen 17 in. monitor


Hi frecklesface,\015\012\015\012Remember, when dealing with monitors, the process of elimination is the best. To elaborate this, it means, connect a similar monitor (if you can convince someone to lend you temporarily just to check if it ... Dell E173FP 17" LCD Flat Panel Monitor

Hp 2009m screen goes black - no signal - Computer Monitors


Change frequency setting to 60hz from the option of graphic setting using another monitor then agin connect your problematic monitor.step1.open properties on desktop using right mouse click.step 2.goto last tab (setting)step3.goto a ... Computer Monitors

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

HP monitor goes black and asking for frequency settings


If you see the initial boot screen until windows boots then you may have a setting for the refresh tate too high in Windows. Try starting in VGA safe Mode by hitting F8 during boot. Once there you go to control panel, Dis ... Computer Monitors

I have a flat screen tv and monitor combi i want to add


Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

When booting up my windows is loading and then my screen goes black and come up with an error: recomended resolution is 1280x1024... how do I fix this?


Most probably your computer has a higher resolution or refresh frequencies set in Desktop Settings than supported by the monitor. It might be also, that you have previously installed a monitor driver for a different monitor model, and the computer is ... Samsung SyncMaster 710VT TFT LCD Monitor

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

Monitor displays Msg. frequency out of range, screen is black


Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change y ... Compaq Computer Monitors

17 in Widescreen Mag Innovision


Dear tfollisHave you checked the HZ that you are using the monitor in windows ? If set at a very high level (for example 100hz) it may damage the monitor as it is not supporting it. (and maybe this explains the reason for the shutoff as a ... Mag Innovision LT776s 17" LCD Monitor

Sharp light turns green thern turns yellow screen goes black


It is going into sleep mode, good luck with this.... i am currently asking how to get my hard drive to quite putting my monitor into sleep mode.\015\012\015\012although it hasn't worked for me because my screen stays black, one of the opt ... Sharp LL 172A-B 17" LCD Monitor

Out of frequency set resolution or see monitor


If you are getting a splash screen (COMPAQ) then video goes black, you can try this. Boot system in Enable VGA mode from the F8 menu and see if you get to the desktop. If you do, you can then go to display properties and adjust the resolution to th ... Compaq 7500 17" CRT Monitor

Frequency out of range


Try to set the monitor refresh rate to Adapter Default despite of Optimal or lower rate of refresh. For this first download the manual of your monitor and check what is the highest refresh rate your monitor can suport. Then goto the display propertie ... HP Compaq FS7600 17" CRT Monitor

Screen says mode not supported h:53.4khz v;84.ghz


You should reboot your computer. Immediately after you see the BIOS splash screen (Dell, Acer, HP, etc...) start pressing the F8 key 2 times every second. If you're quick enough, you'll get the Windows boot menu. When you see the menu, select "VGA ... HP Compaq d530 CMT Intel Desktop PC - Intel Pentium 4 2.8GHz, 512MB DDR, 40GB HDD, DVD-ROM/CD-RW, Gi

Hi, my problem is that i can run my pc only in safe mode and if i try to use it in the normal way the monitor tunrs black and the blue light starts blinking, i can't configure it with the resolution 1920X1080 because my pc doesn't support it, is that the reason of my problem? thanks


This usually happens when your computer is set to a resolution that the monitor does not support. I have seen it when I set the resolution too high. That's why windows asks you to confirm the new mode after is switches to a new mode.I thi ... Samsung 2333SW 23" Widescreen DVI LCD Monitor

When the computer is turned on the monitor goes to sleep mode


Go to safe mode,select boot in vga mode.\015\012\015\012If this allows you to start,\015\012\015\012Click start,Run type desk.cplScreen Saver tab | click on EnergyUnder desk or office settings frame, set all values ... Computer Monitors

Monitor cold start issue only as #2 monitor


The start up problem is common and will only get worse. Call Samsung as these monitors have a 3-year warranty. No receipt? They will accept your word regarding your purchase. I have\015\012two that failed exactly the same way. I called 1-800-SAM ... Samsung SyncMaster 931B 19" LCD Monitor

"Input Not Supported" message on monitor at boot


Sounds to me like the input has gone out of the boundaries the monitor supports. IE the refresh rate is too high frequency (normally 60 to 72 Hertz for LCD's) or the screen resolution has been set too high.\015\012\015\012Go into safe mod ... Envision EN-9250 19" Flat Panel LCD Monitor

LG monitor, Win7 and windows resizing on power cycle


Well you see this is a function of how this, any, monitor work, you see after coming back, from "Being Asleep" it does NOT hold, the last settings onboard, thus when it awakes, it must "Ask" the PC, what resolution do you want me to display in?... Th ... LG W2261V 22" LCD Monitor

Laptop monitor goes black


If you're working on the computer when that happens, it's not probably a power setting. Try to update your BIOS to the most current version at the toshiba support website (support.toshiba.com) & see what happens. Fixes the issue most of the time ... Toshiba Satellite A100-S8111TD Notebook

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

I have a Problem with HP Pavilion F1703 17" LCD Monitor, When I turn the HP computer on the monitor only comes on but for a brief second and then it goes black. cant check the settings because the screen is black, It worked fine the last time I used it.


Try connecting another screen and change resolution & frequency level to like 60hz, then switch back to your hp monitor. ... HP Pavilion F1703 17" LCD Monitor

Monitor Display Offset


Hi HarryH,\015\012\015\012\015\012Sounds like the web cam software may have changed a .dll or some other system file that the video chip is using. I would try uninstalling any software from the cam and removing and reinstalling the video drivers.\015 ... Kogi l4bx-na ko 14.1" Flat Panel LCD Monitor

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Moniter keeps blinking analog and digital at the


This happens when your monitor cannot detect a VGA or Digital port, either on the monitor it self or at the video card. If you don't hook it up to anything at all and turn it on it will do this. \015\012\015\012Step #1 \015\012 ... Samsung Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8889 seconds