Having problems with your Computer Monitors ?

Lg CRT monitor model 500g 17inch -out of frequency

\015 Hi, I have a LG 17inch CRT monitor model 500G,I have installed Win XP,98 and 2000 on my machine.One day accidently, I Changed the settings from the monitor panel(OSD settings) and now whenever I try using WinXP,I get msg out of frequency.All this time whenever I use Win98 or Win2000, it works fine,i dont get any error msg.I tried loggin in safe mode(win Xp),it didnt work,I again got the same msg - Out of frequency.Please help as when my friend checked my harddisk at his place ,win xp worked fine.\015

Answers :

First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.
\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operating system, specifically the software drivers for the video board and monitor, must be correct in order for the monitor to work. In other words: there are three computers that must be able to communicate with each other - the main computer, the video board computer (microprocessor) and the monitor's computer (also a microprocessor). Think of the drivers as the programs for each of the microprocessors. The message you are getting says that one of the three programs is sending data to one of the other programs and that the receiving program is complaining that it is "talking too fast to understand".
\015\012
\015\012So, which one? Since you are not having any problems with Win98 or 2K then it is not a problem with the monitor (or so it seems). Since each Windows operating system must load its own driver, and many times these drivers are not the same (actually the "kernel" is if you think of them as programs for the microprocessors) because they must talk to the operating program too. I'm puzzled about the "...safe mode...didn't work..." comment since safe mode doesn't load the drivers on purpose. Maybe it worked at first and you didn't change anything so it didn't work when you logged back on without safe mode?
\015\012
\015\012POSSIBLE SOLUTIONS:
\015\0121. Start up in Win2000 and look at "properties" for the video board and monitor. Use "advanced" if necessary and write down all of the driver names, the make of the vidoe board and especially the "frequency" of the monitor that it "thinks" it is. If it is "auto" then see if there are any other choices (50,60,65,70,72 and 75 are all popular sweep frequencies). Note that the video card AND the monitor must be able to communicate at the SAME frequency. One of them (or both) can be on "auto" but one can't be on 60 and the other on 72! This will produce the error message you describe.
\015\012
\015\012Now, try to start up your WinXP (safe mode if possible) and fix (match) the properties/frequencies. You will have to bring up the control panel to do this since the "properties" selection is locked out in safe mode.
\015\012
\015\0122. If this doesn't work then it might just be a program that is loading during startup. Check the "run=" statements in the Win.ini and system.ini files for WinXP. Remove or comment these out. An older game or application that didn't work on WinXP may try to grab the video before the system would start. Eliminate, or comment out if you don't want to eliminate any that you might want to keep, any program that you suspect or just don't have a clue what it does. Suspect programs that load on startup are virus checkers that were not written for XP.
\015\012
\015\0123. Save, preferably on a removable device (USB thumb drive) your current video card and monitor drivers for WinXP as a backup. Log in using Win2K, download current drivers for your video card and monitor, also onto the thumb drive. Then, delete the drivers from the device manager. When you restart it should say "found new device" for both the video card and the monitor. It should then ask for the drivers. Point it to the thumb drive and load the new drivers.
\015\012
\015\012Please rate this solution and let me know how it turns out...
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lg CRT monitor model 500g 17inch -out of frequency


First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operat ... Computer Monitors

LG Studioworks model (500G)CRT Monitor flickers most of the time


Lg 500g studioworks green color ... LG Flatron 775FT 17" CRT Monitor

I used CRT monitor now iconect hcl 710 Lsa model lcd monitor no signal disply. an other cpu accept his monitor working good what problem ? My cpu core 2 duo intel prosser 2 gb ram 2ghz


Possibly, the CRT monitor was set to a frequency which is too high for the LCD monitor.Try booting in Safe Mode (press F8 at boot), then set the video for a lower resolution.Reboot with the new, lower, resolution.I ... Honeywell Computer Monitors

''out of frequency range'' on crt monitor


Go into your "Device Manager" in Windows and find out if your HDTV monitor is still installed. Delete the settings under the monitor tab and reboot the computer. With any luck the reboot will cause Windows to re-detect your current monitor and instal ... Compaq Computer Monitors

High frequency sound out of monitor


Tell OS and monitor model...?\015\012\015\012set this configration in win xp os...\015\0121024by768 pix\015\01232bit\015\012and go to display properties=>advanced=>monitor=>change the frequncy....\015\012s ... PC Desktops

Resolution Problem I have lg 15inch monitor Model 500G Problem: i am not able to change display resolution from 800x600 to 1024x768 or more When i supposed to do that monitor displays OUT OF FREQUENCY can an body help me


Go to your desktop display properties then go to setting then go to advance then monitor tab chack your screen refesh rate may be 85Hertz.now change rate to 56Hertz and apply.now you change your resolution 800*600 to 1024*768. ... LG L1915S 19" LCD Monitor

PF790 monitor picture issue


Was it dropped? If so, it could be a board crack or damage to the CRT.\015\012\015\012Was it stored in an unheated garage, shed, or attic, etc.?\015\012\015\012Damp air or widely changing temperatures can cause condensation on the circuit boards.\015 ... ViewSonic PF790 19" CRT Monitor

Microtouch CRT Monitor has no picture


We have 3 Brand New 15" Micro Touch CRT monitors for sale 954-336-7587.\015\012\015\012TECH SPECS FOUND ON THE FOLLOWING PDF: http://pdf.superwarehou ... 3M MicroTouch 17" CRT Monitor

Yellowing screen after 15 minute great working!


Styber,\015\012While CRT monitors are very good with color rendition, they do have a warm up time (at least 30 minutes before to get the truest color they can give) they also lose brightness and contrast over time. Since you do Photshop work a ... HP 91 (White) 19" CRT Monitor

Monitor distortion monitor has major distortion like wave across the screen..the hard drive is constantly running to hard seems like it has something to do with it


Hey edwardaaron,\015\012 \015\012If you are encountering any kind of visible distortion on your computer monitor, there are a couple of things that I would suggest.\015\012 \ ... PC Desktops

Grey Squares on the monitor


Try reducing the resolution, Since the CRT you are referring to is old monitor, it might not support high resolution. ... TTX Medallion Series -8570 (White) 15 in.CRT Conventional Monitor

I have CRT moniter i installed harry potter Game.when i start the game, it shows "OUT OF FREQUENCY" error with time notification(20 sec) and the moniter shuts. Please tell me the solution .


1. Change the monitor frequency My Computer----->Control Panel-------> Display-----.Refresh Rate tab (select one by one and check the game)\015\012 \015\012or\015\012 \015\0122. try to attach another mo ... LG Studioworks 563N 15" CRT Monitor

Monitor working properly but it sounds continously,very noisy


Hi im josh in cebu phils.may i help you? Friend try this solutions:\015\012Problem: Your Monitor Doesn't Display—The System Unit \015\012Issues a Series of Beeps\015\012Your PC uses beeps to communicate with you when something is \015\012 ... Dell Pentium 4, 2.26 GHz (1W391)

Viewsonic P225f CRT - clicking "short circuit" sound, shrinks and expands


Just on a whim I'd say open er up and dust it out , and look for bad solder joints.\015\012\015\012That means get out your soldering gun and have a look around the board.\015\012\015\012what you described is "intermitant failu ... ViewSonic P225f (Beige) 22" CRT Monitor

Monitor keeps blank even the power lLED is on green


I suspect the problem is with the monitor itself. I have had the same problem. I reported it to Dell and they sent me a new monitor within a few days the problem resurfaced again on the new monitor. They have since sent me a new monitor and the probl ... Philips 105S51 15" CRT Monitor

The Red Colour Loss On My Samsung SyncMaster 753 DFX


My Dear Friends,I Understood the problem.I will explain it a little briefly.There is an Integrated Chip (IC) inside the monitor which gave RED, GREEN and BLUE ( Primary Colours) to the CATHODE RAY TUBE (CRT) otherw ... Samsung SyncMaster 753 DFX 17" CRT Monitor

Monitor is busted!


If your pc works on another monitor. I would recommend you buy a new LCD monitor or a used CRT.\015\012\015\012The best solution if your computer works is to buy a LCD screen, I've thrown out my 17" crt screens they aren't worth anything ... Gateway FPD2275W LCD Monitor

My monitor AOC CRT model F1770 has a problem


... AOC 1556NB 15"

Sony 24'' CRT widescreen GDM-FW900 blurry after initial on


CRT shorts are common with this model and focus problems are a major symptom. however, the loud 'pop' you described leads me to believe that the flyback transformer may have a problem in the focus divider portion. replace the flyback, if that fails t ... Sony GDM-W900 24" CRT Monitor

Using CRT monitor


Try back to other machine again. ... Dell E176FP 17" LCD Monitor

When booting up my windows is loading and then my screen goes black and come up with an error: recomended resolution is 1280x1024... how do I fix this?


Most probably your computer has a higher resolution or refresh frequencies set in Desktop Settings than supported by the monitor. It might be also, that you have previously installed a monitor driver for a different monitor model, and the computer is ... Samsung SyncMaster 710VT TFT LCD Monitor

Green color missing from my LG 700s model


As you are electronics engineer so let us discuss technically.\015\012\015\012as you are unable to see green colour means you might be seeing picture of magenta colour\015\012\015\012as technically\015\0 ... LG Studioworks 700S 17" CRT Monitor

A really loud cracking noise, akin to a 'zap', and the screen distorts


This may be happening because the tube was not fully clean when sealed and some particles left inside are finding homes next to high voltage. or the power supply is beginning to fail and arcing internally where it finds shortcut electric paths inside ... Compaq P110 21" CRT Monitor

940mw - Compatibility


First thing i would check is your settings. See if windows is reconizing two monitors. If not then you will need to tell it to find it. Hook up your second monitor goto add new hardware and see if windows finds it. If it doesnt find it then i would g ... Samsung SyncMaster 940MW 19" LCD Monitor

Icons and display immages are distorted. Adjustment sittings will not stay consistant even after following the troubleshooting instructions. The device is an Emachine with a windows xp application purchased new in the fall of 2009


Hiplease provide a few more details*system model number?*did you purchased a monitor with the system or are you using an old monitor. is it lcd (thin)? or CRT (big)?*what troubleshooting instructions did you follow? ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5567 seconds