Having problems with your Computer Monitors ?

Mitsubishi xc-3716c monitor

\015 Very high end monitor, 1280x1024 res,rgb inputs,need advice on digital tuner selection.what is ttl mode? any advice welcome,just want to save this from the analog graveyard. searched the net for info on this unit,not much to be found. help!\015

Answers :

Model (XC-3716C)

Manufacturer's product description
Mitsubishi represents the pinnacle in technological achievement for multi-person viewing of workstation generated, high resolution imagery such as CAD/CAM/CAE or scientific visualization. With its 37" (35.0" diagonal viewable image) flat-square CRT, Dynamic Beam Forming for improved image definition at monitor screen edges and with exceptionally sharp 1280 x 1024/75 Hz non-interlaced addressable resolution that is bright and bold even in high ambient lighting, the monitor delivers unparalleled performance and versatility. It also comes equipped with stereo sound and operates from virtually any worldwide video standard, plus compatibility with today's most popular graphics standards. Front control panel or multi-function wireless remote control (NOT INCLUDED) and on-screen display of all set-up functions make control adjustments, as well as input selections, easy and accurate. The XC-3716C color display monitor will truly make your next technical presentation sizzle with unforgettable impact. This unit was built in 1995 and has not seen any serious use since the year 2000
General
# Display Type: Presentation display / CRT - stationary
# Width: 34"
# Depth: 23"
# Height: 29"
# Weight: 209 lbs
# Enclosure Colour: Gray
# Compatibility: PC, Mac, Unix
Display
# Diagonal Size: 37"
# Viewable Size: 35"
# Max Resolution: 1280 x 1024 / 75 Hz
# Colour support: 24-bit (16.7M colours)
# Max Sync Rate (V x H): 120 Hz x 85 kHz
# Factory Preset Resolution Modes: 1280 x 1024 / 75 Hz
# Front Panel Controls: Power on/off, adjust +/- , colour adjustment
# On-Screen Controls: Contrast, brightness, H/V-position, H/V-size, degauss, trapezoid, parallelogram, OSD-position, colour temperature selection, audio volume, speaker on/off, select
# Features: Invar shadow mask
# Compliant Standards: UL, CSA, DHHS, PTB, FCC-B, FCC-A, VCCI-I
Video input
# Analogue Video Format: NTSC, SECAM, PAL, M-NTSC
# Analogue video Signal: RGB, S-Video, composite video
Audio output
# Type: Speaker(s) - integrated
# Sound Output Mode: Stereo
# Audio Amplifier: Integrated
# Speaker(s): 2 x right / left channel
Connectivity

Port(s) Total / Connector Type:

* Audio - line-out
* 1 x - 1

No burn ins - Crystal Clear Picture

Accepts RGB input with special cable that is provided

VGA inputs for computers and such
Ttl is in short from Transistor-Transistor Logic.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Mitsubishi xc-3716c monitor


Model (XC-3716C)Manufacturer's product descriptionMitsubishi represents the pinnacle in technological achievement for multi-person viewing of workstation generated, high resolution imagery such as CAD/CAM/CAE or scientific visualiza ... Computer Monitors

Have high end mitsubishi xc-3716c crt monitor. need atsc tuner. new to this stuff,need help


HDfury is a simple device that will allow you to use in 1080p resolutionany HDMI tuner or other device on your, therefore, unless there is an additional problem (faults etc.) , it will work ... PC Desktops

Mitsubishi NEC Diamond PRO 930SB Monitor - cover removal?


Remove the screws as you have done. Looking at the monitor front on you'll see 3 bits sticking down from the top (in the deatil gap) which are clips unclip them by pushing through the corresponding holes along the top. Also there's a clip at each sid ... NEC Mitsubishi Diamond Pro 930SB 19" CRT Monitor with SpectraView

Monitor Does Not turn On...


My Friend you have a problem in the power supply, you try voltage check, check if you have output in the b+. if nothing, there is a regulator in power section, for example ic401, you look at the board you will see all the components section of ic401, ... Apple Mitsubishi Diamond Pro 2060u 22" CRT Monitor

Mitsubishi Diamond Plus 71 monitor that won't power up


... Mitsubishi Diamond Plus 71 (White) 17" CRT Monitor

Mitsubishi monitor is distorting the picture


Well first af all ,you never find this "loose wire" because it is a mith.\015\012what you have is a "cold solder" in the vertical IC, if you have a solder iron , and the ability to open it (without scratching),\015\012and then take off all the shiel ... Mitsubishi Diamond Plus 73 17" CRT Monitor

Monitor problem actually,I am now using another monitor and i have no problem with my computer,i use it everyday in my cellphone repair shop. But I want my 17' mitsubishi flat crt monitor back,because i'm not comfortable with this 15' IBM crt monitor. I've already changed the horizontal transistor with the same value(C5587)because it is shorting but it doesn't work and theres no changes.so please please.. help me. i want to repair it my self.


The reason I had asked if you had tried a different monitor was to determine if it was the monitor or the computer that actually had the problem. That wasn't clear in the first question.\015\012A computer that is having issues will cause the s ... Mitsubishi Diamond Plus 73 17" CRT Monitor

Monitor picture fades out.


I thought my problem was originally monitor related. However since I posted, the picture disappeared altogether, and my PC wouldn't even start to bootup. Fearing my mobo may have died I removed the hardware components, cleaned then re-assembled them. ... NEC Mitsubishi Diamond Pro 920 19" CRT Monitor

Mitsubishi Diamond Pro 930SB limited by Vista


... Mitsubishi Computer Monitors

Connecting mitsubishi diamond plus 100E to macbook


... Mitsubishi Diamond Plus 100E Monitor

Mitsubishi diamond pro says "no signal"?


You have tried the monitor on more than one known good computer, yes?\015\012\015\012I believe about 4" inside this monitor in the back the vga cable or connector connects to a board with an in-line connector. Can you see if this connect ... Mitsubishi Diamond Plus 100E Monitor

Two Advueu flat screen monitors need service every 6 months or so


I have never owned one but when you list out monitors with the same specs Advueu always comes up as one of the least expensive.\015\012\015\012Although there are exceptions, the lower price will almost always indicate a lack of quality. ... Microsoft Advueu Lcd 19W 190Wdt Bk Slv 5Ms Dvi 800:1 170 160 Monitor

No screen ( mitsubishi diamont point V71LCD)


1. check the monitor neck board. \015\012\015\0122. remove the G2 pf.\015\012\015\0123. Solder the drypoints in monitor kit. Yoke connections. ... NEC-Mitsubishi Nec Display Solutions DiamondPoint V71LCD 17" Flat Panel LCD Monitor

Soyo 17'' Monitor (DYLM017A)(VT17N71), identity of fuse.


Orange color of the ring means number 3. Part of marking also contains "3A" so I'm pretty much sure it is 3 Amps rated fuse. But before replacing it measure the resistance on the PCB where that fuse was blown, between common mask (usually metalized m ... Computer Monitors

Monitor Display on TV


Try the following:\015\012Power up the projector first. With the laptop hooked up but not powered on once projector is warming up begin booting laptop. If there is still no display once its projector is fully warmed up and laptop booted you can ... Dell Inspiron 6000 Notebook

Vertical white line near the left end of the screen.


Usually when there are colored lines on the LCD its because the screen is going bad. Quick way to verify this, try a different monitor on your computer and if the line goes away then you know for sure the monitor is bad.If you try a diff ... Mitsubishi Power Adapter for DiamondPoint V50 Monitor

Monitor problem actually,I am now using another monitor and i have no problem with my computer,i use it everyday in my cellphone repair shop. But I want my 17' mitsubishi flat crt monitor back,because i'm not comfortable with this 15' IBM crt monitor. I've already changed the horizontal transistor with the same value(C5587)because it is shorting but it doesn't work and theres no changes.so please please.. help me. i want to repair it my self.


To do an internal repair on a CRT is beyond my level of expertise.\015\012I would leave repairs like that to those that do know. I've heard too many horror stories about what can happen if you don't know your way around the inside of a CRT. ... Computer Monitors

The sreen is black, and the monitor light is orange


This usually indicates an input problem. There are number of things to check:\015\012\015\012Make sure the screen is plugged into a working output on the video card - if you can, test the video with a different screen.\015\012 ... NEC-Mitsubishi Nec Display Solutions DiamondPoint V71LCD 17" Flat Panel LCD Monitor

Need help with Mitsubishi 15


Try pushing the contrast button, and then some of the other buttons once the contrast menu is up. To control those menus you use the buttons on the front of the monitor, not the keyboard and mouse. ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

I just bought a used Mitsubishi-NEC V71LCD monitor. After connecting the power cord, and the video cord, I powered the monitor up. It had a video display for about two seconds, and then went black. I reset the power, and get the same results: video for about two seconds, then screen goes black. Please help! Thanks...Dan


Dhowie, Monitor will need work done to internal "switch-mode-power-supply"/"CCFL inverter supply board. possible bad electrolytic filter capacitors or thermally intermittant component soldering on printed citcuit board. Your CCFL back-lit LCD display ... Dell E152FPb 15" TFT LCD Flat Panel Monitor

Horizontal/Vertical Postion of Image on LCD Monitor


The controls for focus adjustment are on the flyback transformer, (that big black thing on the left hand side (usually) of the monitor with the thick red wire that goes to the CRT.) the flyback may have 1,2,3 or even 4 knobs on it. 3 of these would b ... Gateway FPD2275W LCD Monitor

Monitor shows equally spaced rectangles


... Mitsubishi Diamond Plus 73 17" CRT Monitor

Mitsubishi Desktop LCD Screen Off and On


First things first!\015\012Economic!\015\0121) Driver for monitor, depending on bran on your monitor Check!\015\0122) TIme to change your monitor *** \015\0123) see if your video card, external or internal is well setup. ... PC Desktops

Color temperature for the monitor


I have mine on 9300K. The whites seem whiter to me rather than the yellowy tint at lower temps. ... Mitsubishi Diamond Plus 91 19"

My mitsubishi diamond pro 900u monitor screen went blank. there is sound in speakers. I noticed there are many power supplies on ebay for this monitor. could the ps be my problem even though there's sound and pwr lite is green?


... Mitsubishi Diamond Pro 900U 19" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3567 seconds