Having problems with your Computer Monitors ?

EMachines E19T6W monitor turns itself off and on.

\015 I have an eMachines E19T6W monitor that has been great up until this point. It's a year old and now after being on for a while it turns itself off. Then after a couple minutes it turns itself back on and then off again. I have had it less than a year so it is still under warranty but I can't find my receipt anywhere. Anyone know a fix for this or know if eMachines will still cover it without me having my receipt?\015

Answers :

First off, I would check the monitor, if it is getting very warm, I would use a can of compressed air to blow the dust out (make sure it is unplugged first!). Second, I would check for any sort of interference in the vicinity (speakers are a huge cause of problems in Monitors) such as magnets.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

EMachines E19T6W monitor turns itself off and on.

First off, I would check the monitor, if it is getting very warm, I would use a can of compressed air to blow the dust out (make sure it is unplugged first!). Second, I would check for any sort of interference in the vicinity (speakers are a huge cau ... Computer Monitors

Weird blink problem...

That's definitely a hardware (incompatiblity) problem. Download the most updated driver for the graphics card. Also see if there is a monitor driver for the monitor.I understand it worked seamlessly for the emachine but you should switch ... E-Machines eMachines Monitor E15T4

Emachine T3414 monitor

Turn off the computer and monitor. Disconnect the monitor. Turn on the monitor. You should get some indication the monitor is on, if not it is probably dead.\015\012\015\012If the monitor seems to be on, try to enter the menu by using ... E-Machines eMachines Desktop PC

EMachine W3107 will not boot, no display.

Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

Emachines model 780 monitor comes on for one second then goes blank

I have a Similar issue with an emachines monitor..after trying a few things such as trying it on a different computer...changing cables and changing power cords..also turned the brightness up all the way...you can faintly see the windows screen on th ... E-Machines eMachines Desktop PC

Emachine desktop The computer worked fine one day and the next day when we went to turn it on it would not power up. The monitor comes on and on the monitor screen it said monitor working fine check hard drive. Well I can't check anything because the tower has no power. The light around the button doesn't come on and you can't hear any kind of fan starting. Called emachines and the only thing they could tell me was to change outlets, did that, turn power off (no power) leave unplugged for 3 minu

I understand that your cpu is not turning on and the repairer confirmed that it is the issue with the mother board. I suggest you to please check the smps fan spinning or not. If its spinning then then the issue could be with the mother board. If not ... E-Machines eMachines Desktop PC

EMachines T6528 desktop will not boot up

The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

Emachine T6410 turns on but the screen says ''No Signal''

When you get the no signal ..this is just the cable that plug into the monitor...either on the video card ..or on the monitor side...but it is sure the cable ...whenever that signal is on ...this means that it do not detects any video signal came fro ... PC Desktops

Monitor will not turn off and keeps flashing the words Auto processing

It is not a bad rom. if it was a rom it would constantly act up but it only acts up upon overheating. The solution is difficult but if you open the monitor you can find all of the heatsinks take them of and replace them with bigger ones. or have a fa ... HP Pavilion F1503 15" LCD Flat Panel Monitor

My monitor goes to sleep mode at startup & can't access safe mode

Turn the computer off, open the case and remove the RAM. Does the computer beep when you turn it on with no RAM? If not, your motherboard is dead. If your computer beeps, turn it off again and try putting one stick of RAM in. If the co ... E-Machines eMachines Desktop PC

This is the same problem on the T6420 I am not sure how to add.

Your problem is the motherboard, it has blown. See my emachine support pages at:\015\012\015\012http://www.motherboardsrus.net \015\012\015\012and click on the text that says "emachine support" \015\012You can contact me by email on the website or by ... E-Machines eMachines Desktop PC

T6520 emachine. when i turn it on the fans start, the keyboard lights flash, the monitor led turns green (getting a signal) and about the time i'd expect to see some display image and/or hear the mobo spkr beep, the monitor led goes to amber (no signal). it had a graphics board - i removed and hooked monitor up to mobo video o/p - same results. i pulled all of the i/o power and data cables - same results. nothing smells burnt - no surge or lightning strikes - just won't reboot??? any suggesti

Based on your previous troubleshooting, with both built-in video and alternate video card, I'd guess you have a bad mobo. Anything else that was wrong with it (RAM, CPU, etc) and you'd get beep codes.Sounds like it's time for a replacem ... E-Machines PC Desktops

Going to Sleep

Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Still having trouble with EMachines T3882

I feel your pain. I finally moved my pc to a room with no windows! But seriously, try a different monitor first. See if you can borrow someone's to just try it before you do anything else. If that borrowed monitor works fine, then you know what the p ... E-Machines eMachines Desktop PC

Emachine t5026 on and right off

Hi maybe you could try these steps I'm always doing when I experience the same problem as yours. This is only according to my experience fixing desktop computers.1. Try to disconnect all the connection at the back of your computer tower t ... PC Desktops

Monitor on emachines computer is black and the on/off light flickers screen will not come on

First make sure the power cord is plugged in both ends (in the wall and in the monitor). When the computer is turned on, it should run a power on-self test and then beep. The monitor light should be green and then the Windows splash screen wi ... E-Machines eMachines Monitor E15T4

T2642 eMachine - does not turn on

... PC Desktops

Computer wont turn on

Hi\015\012Bad news. your motherboard has been fried. You could try refashing the BIOS but I've got $10 dollars to your one that it wont work. Best bet - keep the tower, keep all of the running gear but a new motherboard and prosessor are in ord ... E-Machines eMachines Desktop PC

Emachines monitor will not turn on. Power button

... E-Machines eMachines Monitor E15T4

Monitor blue light comes on shows emachines logo and color bars then monitor turns off and light turns yellow

Your monitor is beleiving it is not receiving any signal from your pc. 1 make sure your cables are secure. 2 make sure your pc is on. 3 borrow a monitor from a freind to see if your pc is sending the signal out, if the borrowewed monitor is showing a ... E-Machines eMachines Monitor E15T4

Emachines monitor goes black while CPU is still working

... E-Machines eMachines Monitor E15T4

I have a emachines t6410 pc and a 15 inch led monitor that came with it. It is apx. 5 yrs old. Am having issue with monitor turning on. If computer sits for a long period (a few hours) without being used the monitor seems to hibernate even though I do not have this option checked. Trying to get it back on is an experiance! I keep fiddlng with the power cord, the cord from pc to monitor, pushing button off n on and finally the blue indicator light will start flashing and eventually the monitor tu

There are two forces involved, one is the monitor itself and the other is a display property. To turn back on press space bar, and that will reactivate.\015\012\015\012Your description sounds like your machine may be sleeping or hibernati ... E-Machines eMachines Desktop PC

Scrambled Signal on LE 1938

To check monitor you may disconnect from the cpu and put on. If u see "no signal" or any other sign monitor is ok\015\012\015\012Remove dust (if there) and clean contacts of your video card and also the MEMORY module. also carefully cle ... E-Machines eMachines Desktop PC

Emachine tower unresponsive

Unplug the Monitor, and attempt to reconnect a seperate monitor to test. If that monitor works properly, then the problem is your regular monitor. If you do not have another monitor, Try unplugging the power from the wall jack to the tower. Then plug ... E-Machines eMachines Desktop PC

Monitor reads: PC entering power saving mode then shuts off;PC on

First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5027 seconds