Having problems with your Computer Monitors ?

Proview monitor PL926WSi Screen goes out after about 5 seconds

\015 I have a Proview monitor model PL926WSi and when I turn it on the screen comes on and the color looks off. The images look a little red and pink. The monitor stays on for about 5 seconds and the the screen kicks off. The power button is still showing the power on ( blue Lcd light). I did change the group of 6 capacitors (470uf25v) C211, C212. C213, C214, C215, C216 and one smaller capacitor (220uf25v) C217. I still had the same problem. Any ideas the might help me out would be appreciated. Thanks\015\012\015\012Thanks\015\012Joe\015

Answers :

Hello Joe,

A red or pink coloration on the screen indicates bad backlight bulbs. They are just like standard fluorescent bulbs just much smaller. When they start failing they light up with a pink color and that will make the screen look pink or red. You can change them but it may not be worth the trouble. You can do a Google search for compact fluorescent tubes and check prices.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com
[email protected]

Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Proview monitor PL926WSi Screen goes out after about 5 seconds


Hello Joe,A red or pink coloration on the screen indicates bad backlight bulbs. They are just like standard fluorescent bulbs just much smaller. When they start failing they light up with a pink color and that will make the screen look pi ... Computer Monitors

Proview monitor won't keep the screen on


Bzinbby1, Hi, I think I know what's wrong. In fact I already know what's wrong! But I want you to do one test to let me know how bad it really is! Here is the test. I want you to reconnect your Proview to an already fully booted "KNOWN GOOD" pc wit ... Proview PL913B 19" Flat Panel LCD Monitor

LCD display Proview


The power inverter is the problem and the only way to fix it is to replace the board. It was a poor design and my Proview 19" experienced the same screen issues as those previously stated. You'll pay $25 for shipping and up to $65 in repair costs. ... Proview PL926WBi 19" LCD Monitor

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

Monitor goes blank less than a second after turning on.


Sounds like either there is a bad connection from the computer to the monitor, or the monitor has a faulty power regulator, causing the monitor to overheat prematurely, and shut off. ... Proview PL926WBi 19" LCD Monitor

No Signal when desktop wants to load


This is exactly what is happening to my monitor but happens a bit faster. Once the drive starts then the monitor turns on and turns straight back off again. The monitor works on other people's computers (including the tech guy at the shop I bought i ... ViewSonic VA1916w LCD Monitor

Proview 926 wbi monitor


This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any question,please let us know email ... Proview PL926WBi 19" LCD Monitor

I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?


The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor

Proview Monitor PL926 Wbi The power indicator


Repair estimate will be according to problem. ... Proview PL926WBi 19" LCD Monitor

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Only brief display on my Proview PL926Wbi monitor


I have the same problem i have to keep turnoff than back on how can i fix it and where ... Proview PL926WBi 19" LCD Monitor

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. W ... Rosewill R700J 17" Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Image appears for 2-3 seconds then screen goes black


The following steps are how to examine\015\012what's wrong with your LCD monitors. After you turned it on and the screen\015\012went black, you have to check that if you can see the image on the screen or\015\012not by shining a flashlight into ... IBM ThinkVision L170m (Black) Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

My screen goes black after startup


Try a different monitor, I am sure this sounds overly simplistic to you but, I have seen in my customers have just that, a bad monitor.\015\012 \015\012If another monitor does the same thing, then you shou ... HP PC Desktops

AG Neovo X-17a


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Neovo AG 17" LCD Monitor

Monitor turns off after 4-5 seconds


... Samsung SyncMaster 920WM LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

Dell 1704 monitor goes to black screen after one


Hi my name is Rain. \015\012Ok so that im clear on the problem. your monitor will come on but in a matter of seconds it goes to a black screen?\015\012If this is the problem. The answers you seek will most likely\015\012be in your v ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

RE:monitor goes black


Monitor going black after a few seconds can be causd by a faulty power supply or inverter. Some monitors have both as one unit.\015\012Sometimes it is basic failed capacitors, After that then I would look at transistors.\015\012The averag ... Acer AL2017 20" LCD Monitor

Screen comes up for about 10 seconds, then goes blank


Hello Robert,You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is ca ... LG Flatron L1750S 17" LCD Monitor

Monitor screen goes out (black) 2 seconds after turning on


Your site is extremely misleading and fraudulent. I was under the impression that I would at least get a hint at what might be a problem instead of you folks making me wait to get a money for something answer that you could have displayed on your mai ... Mag Innovision LT976S 19" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6933 seconds