Having problems with your Computer Monitors ?

Screen stating not at optimum mode requesting 1280x1024hzm i have raedeon video card


Answers :

Samsung syncmaster 170n monitor shows black with screen stating not at optimum mode requesting 1280x1024hzm , how do I fix this?
How many mb is your video card? how big or size is your monitor?
\015\012
\015\012it depends upon you what suitable resulotion your going to use in your settings....moslty nowadays in can support wxga format resulotions,or up uxga resulotions.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Screen stating not at optimum mode requesting 1280x1024hzm i have raedeon video card


Samsung syncmaster 170n monitor shows black with screen stating not at optimum mode requesting 1280x1024hzm , how do I fix this? ... Computer Monitors

Driver needed for TSST Corp CDDVDW TS-H653N SCSI CdRom Device please. DVD drive shown in My Computer, and MS says I have the correct driver for this device. But, it doesn't work.


If the computer still cannot read a disc, there may be a problem with the drive. Go to method 3 to troubleshoot the CD or DVD drive.\015\012If the computer can read the other disc, there is a problem with original CD or DVD. Contact the manufacturer ... Compaq PC Desktops

X2Gen MW19V Greenish display


Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... X2Gen MG19MY 19" LCD Monitor

22" Hanns G can't config..driver issue? Some of the pages look ok but the resolution is maxed at 1680 x 1050 (per tec support) and although it real sharp everything is like 14 point.


Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

I have a Dell Inspiron 1501 and its a little over a year old. It started acting funny about a month ago. It will work fine for about 5 minutes then it goes to a screen with different colored bars and i have to restart it again. I bought a new battery thinking that was the problem but that hasnt solved anything. HELP


Hey there,Colored bars make me think of hardware failure of the 1)screen or the 2)graphics card. Both of these, on a laptop, are going to mean sending it in for repair, out of warranty, and paying their rate, which maybe 150 bucks or more. Now ... Dell Inspiron 1501 Notebook

HP Pavilion zd8000 PC Notebook Problem


Hello people! I have a solution for the resolution probleme, Please read.\015\012\015\012As all of us, I have the SAME probleme with the graphics.\015\012\015\012After having my computer crashed and out of warranty, (and after ... HP Pavilion zd8000 Notebook

Monitor keeps stating "monitor going to sleep" now awhile after booting up. The monitor works fine with other computers and the computer in questioning when in safe mode - yet if tried to boot normally, the monitor says going to sleep. Recently, I used that monitor to work on another PC but didn't touch the now affected one - but after plugging it back into the old one.. this is the issue


This is probably a video setting issue. In Safe Mode, Windows starts with low resolution and color settings, so the monitor can display them. But when it tries to start normally, Windows is using a video setting the monitor can't handle.S ... Compaq FS7600 17" Flat Glass Monitor

-computer has gone blank


This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor

Cannot display this video mode optimum resulotion 1280*1024 60hz


Hi,Chances are that the video driver for XP and 2003 differs (even if only slightly). You might want to start the 2003 in "Safe Mode" first to lower both the Screen Resolution and Screen Refresh Rate to the lowest possible. Thereaf ... Dell E173FP 17" LCD Flat Panel Monitor

I can't reboot after installing Intel VGA driver


Hi!\015\012\015\012Just try to run in the safe mode 1st and try to fix the problem there.Your video card most probably is a built in with the motherboard and the new video card driver might require you a higher memory.\015\0121.The ... Acer Aspire 3680 Laptop

Lcd montor not working help - Samsung SyncMaster 920NW Monitor


Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

Lenivo 3000 J series will not boot. Get nothing.


Check the capacitors on the motherboard, I have 3 units that did the same thing. See how many are bulging on the top, they should be flat.\015\012Check the ones around the cpu or the video card slot. ... Lenovo 3000 J Series 1.80G VBE PC Desktop

Acer aspire video hardware error


Hi,I just wanted to take a moment and acknowledge your request. It sounds to me, on first instinct, that your video encoder/decoder software components may be or probably is faulty and or just not up to date. A hardware video display adap ... Acer Aspire 5500 5570-2609 Laptop

At POST I get 2 short beeps - Dell Dimension 5150 (DIM515MIN) PC Desktop


It depends on the bios chip maker Here's some other beep codes: for Award and Phoenix BIOS: 1 short beep: Normal2 short beeps: CMOS error1 long and 1 short beep: DRAM error1 long and 2 short beeps: Video card ... Dell Dimension 5150 (DIM515MIN) PC Desktop

Video not waking from sleep mode, can I slap a card in this machine?


Sleep mode is problematic in Windows XP and always has been. It works well on some computers and not on others. Before looking at the Video card as the culprit I would suggest you simply turn it off which will more than likely solve your problem. You ... HP Compaq Presario SR1830NX PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Laptop wont bootup or sticks at the blue screen!!


Thanks for the posting. \015\012But I went on to the DELL website and downloaded the necessary drivers and was able to fix the issue. The drivers come in a .exe file so I copied them to the laptop via a USB and executed them. I think it was the ... Dell Inspiron B130 Notebook

I have an error message on my screen which ios moving around. It says - 'not optimum mode. Recommended mode : 1280 x1024 60Hz'.


You need to update the video drivers of your computer, 1280X1024 is the optimum setting for a 17" LCD monitor.\015\012Go to control panel> display>settings and see if you can manually set your computer to 1280X1024 and also select monitor ... PC Desktops

I have a Dimension E521 and i get a crash wit a stock vid card


Uninstall your video driver then update your driver for your stock video card ... Dell Dimension E521 AMD Athlon 64 X2 Dual-Core 3600+ , 1 GB DDR2 SDRAM , 250 GB EIDE SATA H... PC Desktop

Black screen After the software was installed on a quad core athlon 9500 it reboots but the screen remains black how to fix a computer crash after pinnacle 12 ultimate


Boot in safe mode if you can. Then select system restore to the time your system is still in good operating state before installing pinnacle.And for additional input I think you have to upgrade your video card if you are using a built in ... PC Desktops

Samsung LCD 510N Monitor not optimum mode error


Paiarunk,\015\012\015\012OK, I was having a mental block for a bit. Your PC will only boot into VGA Mode, I?m assuming if you don?t Windows will crash or something. Exactly what led up to this, have you added a new video card or loaded new drivers? W ... Samsung 510N 15" Flat Panel LCD Monitor

Ialmrnt5 video driver error


When you first boot up the computer press F5 continously until a boot menu shows up. Then choose "start windows in low-res mode". This option will start windows in the lowest resoloution and hopefully it will boot up and you can change the resoloutio ... Dell Dimension 3100 PC Desktop

Follow up Re: Blank Screen


Most likely the operating system of your computer is already corrupted. you need to run the recovery on the computer. if you have the recovery discs with you, simply put in the disc and boot to cd. included in the recovery disc are the drivers that y ... Toshiba Satellite P205-S6287 Notebook PC

I have a problem with my monitor hpw1907v


Not sure which windows you are using but on my Vista there is also a setting for power saving on the PCI Express video card. Have you tried changing that setting. Not sure if that would be the problem but worth a try. Mine is set for maximum power ... HP w1907 LCD Monitor

Emachine T2385 Won't Boot in Normal Mode past Windows XP Screen


The first thing I would check is your video card (usually driver) problem. Start windows in safemode with networking. If this problem has occured after updating the video card driver you may try rolling back the driver to a previous version, otherw ... E-Machines Celeron 2.3GHz (rb-t2385)
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6427 seconds