Having problems with your Computer Monitors ?

When computer is started no signal appear on the monitor.

\015 Dear sir\015\012problem with my crt Acer Monitor\015\012when computer is started no signal appear on the monitor.\015

Answers :

If your monitor is working fine, my guess is you might forgot to turn on the monitor power switch which is located at the lower right bottom corner. try it
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

My samsung 940N acts like a florescent tube, tries to start and doesn't

Use the self test feature.. follow the steps..\015\012\015\0121. Turn off both your computer and the monitor.\015\0122. Unplug the video cable from the back of the computer.\015\0123. Turn on the monitor.\015\012If the m ... Samsung SyncMaster 940N 19 inch LCD Monitor

When computer is started no signal appear on the monitor.

If your monitor is working fine, my guess is you might forgot to turn on the monitor power switch which is located at the lower right bottom corner. try it ... Computer Monitors

Emonster 600 won't boot up

You should not loose any information seeing that all information is held on your hard drive. As for changing out the processor, it seems pretty intimidating but is rather simple. When you have the side of the computer removed and can see into th ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

On Pwr up logo appears then LCD returns to stanby Black screen

I will assume the monitor is staying on during the boot process all the way until Windows loads.\015\012If that is the case, then...\015\012\015\012Start the computer\015\012wait unt ... BenQ FP71E 17" LCD Monitor

Monitor won't stay on. Error message comes up that says "no input signal", then monitor goes out.

Problem with the monitor, monitor cable, or video output. For monitor, if you have more than one input, make sure it's set to the correct one. Try a different cable. Try a different monitor. Check your video card settings--if you see the BIOS boo ... HP PC Desktops

Dead pixel I have a black spot on the bottom right corner of the screen..can it be repaired?

\015\012Please read the WHOLE of this guide before starting.\015\012Software Method\015\012\015\012Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them ... HP Compaq WF1907 Monitor

Monitor displaying out of range message - Hansol Computer Monitors

Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

Monitor Goes Black

Every now and then I inadvertently push a button on the lower right side of the monitor that causes the display to go blank as if it has stopped receiving a signal from the computer. Unfortunately I can not recall what the settings or buttons are tha ... Gateway FPD2275W LCD Monitor

Monitor goes into power saver mode

Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

The monitor turns off and on repeatedly.

There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Cannot get new Motherboard to boot up in Normal Mode

What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Acer AL1912 sometimes doesnt start

Try reseating your cable connections. While you have them off, take some compressed air and clean both the connection ports on the back of the computer and cable connections. Check to make sure there are no bent pins on the cable connectors. If you k ... Acer AL1912 19" LCD Monitor

Monitor signal on monitor saying (input not supported) floating around the screen in a gray box. screen is black, with no response from computer. widows loads on screen when first starting computer, (no buttons on the monitor appear to work).

When your computer is starting up, hit F8 and you'll see the safe mode, safe mode with networking, etc. screen...You should see a choice that says "enable vga mode". Select that and windows will start and the os will select a screen resolution for y ... Acer X193W LCD Monitor

Monitor stuck in sleep mode

It will do this when it's not getting a video signal from the computer. Make sure that the signal cable is firmly plugged in at both ends. Also verify that the computer is actually starting up. The monitor may not be getting a signal because the comp ... Compaq TFT5015 15" LCD Monitor

Unable to print using samsung print on Windows XP

To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

I was adjusting picture on monitor and now picture completely messed up

\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

Acer Monitor boots up w/computer then "no signal"

You must have disconnected it while the pc was running.damage can occur while doing this as can a keyboard (they are not like USB devices that can be plugged and unplugged while "hot".) ... Acer AL1916W 19" LCD Monitor

Green Power light blinking

Check the resolution in the Windows while connected to the old monitor. If greater than 1280 X 1024 and/or\015\012the refresh rate exceeds 75 Hz, the monitor may not respond. But you\015\012should at least see the BIOS splash when the computer is tur ... AOpen F70PS 17" Flat Panel LCD Monitor

When I shut down my computer, I think that it is shutting down completly. All lights are off indicating that it is shut down. Then a small blue window will appear and will say "Entering Power Safe Mode". Then the window is gone. (Still everything is off). I can get up in the morning and my computer is on and no one has gotten up to get on it. It will not shut down every time.

If you are turning off your computer by pressing the front panel power button, it is probably just putting Windows to sleep but not shutting the computer off. If your computer has Windows Vista, the default is to hibernate and not shut down even if y ... HP Pavilion a810n (PP164AA) PC Desktop

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

Monitor says no signal

Is this a brand new system? What is the make/model?\015\012\015\012This is a peculiar problem, as the computer was working fine for several months after you purchased the computer, then suddenly started this behavior. The fact that you ... PC Desktops

Monitor not using all available space

Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

No driver appearing in Vista

Sorry this is late but:\015\012\015\012Unplug the monitor from the PC and then boot.\015\012after you hear the windows starting sound wait for it to load everything up (say 1 min) and plug in the monitor\015\012\015\012W ... Acer AL2017 20" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9204 seconds