Having problems with your Computer Monitors ?

After Windows has started and the setup screens show, my Kogi monitor says "out of range" and the screen goes black. How can I fix this?

Answers :

When you switch from a CRT to LCD, your refresh rate will decrease. This is \015\012easily completed by changing the refresh rate on your computer. To make this \015\012adjustment please connect your old CRT monitor to your computer.

1) Open the \015\012Control Panel (located in the Start menu, Select [Settings].)
2) Double click \015\012on the [Display] icon.
3) Select the [Settings] tab and adjust the [Screen \015\012Area] setting by moving the indicator bar to the right. Your appropriate setting \015\012is based on your screen size.
12.1" LCD, 800x600
14.1" or 15" LCD, \015\0121024x768
17" or 19" LCD, 1280x1024
4) Select the [Advanced] button located \015\012in the lower right corner,
5) Click on [Monitor] or [Adapter] tap.
6) \015\012Select a Refresh Rate/Frequency of 72 Hz or lower.
7) Select [Apply].
8) \015\012Select [OK] to keep the settings.
9) Shut down your computer.
10) Connect \015\012your new LCD monitor to the computer WHILE IT IS OFF.
11) Turn on the \015\012computer and LCD monitor at the same time. This will resolve your issue.

Good luck.
Set the resolution lower.
\015\012It is telling you that the resolution you want is beyond its normal operating range.
\015\012just drop it to lets say 800 x 600
\015\012Then bump it up one resolution at a time until you get the message again, then drop it back one.
\015\012Running monitors above the acceptable range can drastically shorten their lifespan.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

After Windows has started and the setup screens show, my Kogi monitor says "out of range" and the screen goes black. How can I fix this?

When you switch from a CRT to LCD, your refresh rate will decrease. This is \015\012easily completed by changing the refresh rate on your computer. To make this \015\012adjustment please connect your old CRT monitor to your computer.1) Op ... Computer Monitors

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank

The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

Black screen, blinking power light, no signal

Its a software bug in the monitor. Mine has done this since new. There is a race condiction between the monitor starting and Windows Starting. If the monitor starts faster then it thinks that there is no DVI connection and it will then revert to V ... ViewSonic VX924 19" LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.

Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Screen shows different colour grids when starting then goes black with message in right corner "out of range"

Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Monitor out of range when a game is booted up

The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

New computor, hp slimline new monitor soyo 19 inch

You need to lower the resolution into the monitor's range. 1024x768 is the usual safe one. Now, if you could tell the operationg system you are running it would be a little easier to help. I'm going to assume it's xp for now. You need to plug a ... Gateway FPD2275W LCD Monitor

Blank Laptop Screen

Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

Viewsonic vp171s lcd flickers on start up then goes black.

This is typical of a back-light problem, especially when you view the LCD screen at a sharp angle and you see a dim Windows image. This fault is caused by either a faulty inverter board or a faulty CCFL lamp.\015\012The inverter su ... Computer Monitors

Monitor goes into power saver mode

Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Monitor comes on for seconds and then goes black

This may be because the resolution that is set in your user profile when you log on has been changed to a resolution not supported by the monitor. The best way to fix this is by going into Safe Mode (press F8 as the computer starts to load Windows) a ... Dell E152FP 15" Flat Panel LCD Monitor

Input Signal Out of Range

I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor

Monitor Screen goes black seconds after turn on-

I ended up fixing my problem, but I'm not sure what the solution is. I had some faulty electrical equipment that I was using to power the monitor (220V to 110V converter and a bad power strip) and I got rid of them. I was using the converter becaus ... Dell E173FP 17" LCD Flat Panel Monitor

My computer wont open windows

Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

Monitor goes black but shows icons...

I'll assume this is an LCD panel screen.If what you are saying is the screen shows up and then goes dim or starts dim, and you can see a dark image of the system starting up and then displaying Windows...Your problem is a bad ... HP vs15 15"LCD Flat Panel Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Acer Aspire 5580 System always restart after diskcheck

Ok have you been able to do those things because the hard work is over. If you were able to copy those files over then start up your computer we may not need to start from the CD.If not then we have to get your computer to boot from the CD. Sta ... PC Laptops

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.

It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

No Display I have a blank screen when booting up computer, however I do have a blinking green power light? I tried hooking up the LCD screen to another computer and still no picture. Thanks, Phil

I have the same problem - the blank/black screen and blinking green power light. The speakers on the monitor work (I can hear the start-up sound that Windows makes), but the screen is blank. \015\012\015\012We bought the monitor on Halloween Night ... Mag Innovision LT776s 17" LCD Monitor

Screen is balnk

You need a new inverter board... it sounds like the transisters or capacitors in the last stage of fireup are gone. I'm no pro, but I've fixed a few lcd monitors with that very same problem.\015\012\015\012Here's something crazy you may w ... Toshiba Satellite A100-S8111TD Notebook

Emachine 15' lcd monitor

Hi,Your query - "can the monitor work with an older HP computer?"Normally yes, assuming that there is no hardware fault. The message is an indicator that somehow the settings of the display of the old HP computer does not mat ... E-Machines eMachines Monitor E15T4

I have an Asus G1 laptop and I was just on it when the screen froze and an error message appeared saying the display adapters were not working and then the screen went distorted and froze so i reset it and now it is blank. It looks like the screen is on but theres nothing on it. When i plugged it into an external monitor it came to windows suffered an error screen but very distorted and says to either start it normally or repair it which just goes back to the same screen. When i go start it nor

Press F8 when you turn on the computer and from the list of options select safe mode and boot into safe mode when you are on the desktop screen go to the device manager ( you can use this path : start-run-devmgmt.msc) in the device manager go to disp ... ASUS A8Jm Notebook

New computer won't start up stuck in auto adjustment mode

You can ask the computer tech what he did to fix you computer and post that info here.Or, check out this tutorial on starting in Safe Mode to find and fix problems. ... PC Desktops

Monitor keeps blank even the power lLED is on green

Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0787 seconds