Having problems with your Computer Monitors ?

Monitor wont get any signal

\015 After a day's use, when i switch on my system, monitor does not get any signals (thats what i guess it is) and CPU will be working. Monitor power signal will stay green. If I plug in and plug out the monitor several times, then it will start getting signals and works. Somedays it will take about 15 minutes for the monitor to get working. What can be the real reason. Any solutions? thank you...\015

Answers :

It should be the problem with ram,
\015\012so remove ram from the motherboard and clean using lint free paper towel and inserted it back. this will fix the issue.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The computer wont boot up. and the screen wont display anything!

Take a multimeter and verify the AC adapter. If it is ok, remove the battery. When you push the power on button do you have any activity ? If there is no activity the motherboard is defective. If you have some activity (leds on, fan activity etc.) : ... Dell XPS M1210 Notebook

I have a kyocera kc 100 viewer and it wont wake up the pc monitor can ya help?

Hi,\015\012\015\012As far as I know, your Sharp screen doesn't have a S-video input. How are you inputting the S-video signal to the screen? The fact that it doesn't "wake up" probably means that it isn't receiving a signal. ... Sharp 17" Monitor

Monitor wont get any signal

It should be the problem with ram,\015\012so remove ram from the motherboard and clean using lint free paper towel and inserted it back. this will fix the issue. ... Computer Monitors

Building a new PC, cannot get LCD to work

You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

A mind of its own

Check the cmos battery and the power suply. lok for swollen compassitors ... PC Desktops

Pc wont read monitor

If you look at the monitor there will be an led light on the front that is always orange or yellow when the computer is off but still connected to the monitor. This led will turn green when the computer boots up, sometimes even showing a "no signal" ... HP PAVILION A6230N DESKTOP PC

Compaq Presario stuck in sleep mode

Connect the monitor to some other computer, e.g., a notebook, and see if it does the same thing. If it does, then the monitor is the problem.\015\012If it does not, then your computer is not putting-out any "video" signal, and so the monitor g ... HP Pavilion a1710n (RK573AA#ABA) PC Desktop

My monitor turns of randomly

Hello cdannyxd I have the same problem as you and the one thing I found out why it dose this is because:1. The monitor is over heating. 2. The board it self has a faulty conductor.3. Or your video card (or driver) is bad. But if it ... Dell E228WFP LCD Monitor

Computer "turns on" i hear four to five beeps, but the monitor gets no signal. a friend gave me the computer, only once did i see it boot up fully but it froze up so i had to restart it and it wont work. everytime i try i get the same thing four or five beeps and monitor says no signal. so i dont know whats happening. its a gateway computer runing windows xp. thats all i know. i know the monitor is good cause i tested it on another computer.

Without knowing the exact frequency/length of the beeps my first guess would be a bad stick of ram or a bad video card. If there is more than one stick of ram in the computer try it with one of the sticks pulled, pulling each stick until it does boo ... Gateway GT5028 PC Desktop

My tower wont turn off and monitor says no input signal and keyboard doesnt work

Do you have two video outputs on your PC ie. one on the motherboard adn a separately installed card maybe? If you do you need to set the BIOS so that it uses the AGP/PCIE video card and not the 'onboard'. Try the onbopard vodeo card first to see if y ... HP Pavilion a1610n PC Desktop

HDTV on Mag LT776s

That monitor wont produce the 1280x720 resolution. It isnt hdtv ready ... Mag Innovision LT776s 17" LCD Monitor

Monitor signal cable troubleshooting

Hi, there is some loose contact in the connection. Take out the cable end from the VGA socket and check the pins inside the socket for any bend inside the socket. Reconnect it, tight the connector with the socket bolts. If not solved, try for any loo ... IBM E74 17" CRT Monitor

Dell computer monitor wont come on when I turn

When you turn on most dell monitors they come on with a yellow light, then turn green when the monitor and video source synch. If your light is not turning from yellow to green, your monitor is either dead or not getting a signal from the video sour ... PC Desktops

My dell flat panel monitor wont come on

Normal 0 false false false MicrosoftInternetExplorer4 \015\012 /* Style Definitions */ table.MsoNormalTable\011{mso-style-name:"Table Normal";\011mso-tstyle-rowband-size:0;\011mso-tstyle-colband-size:0;\011mso-style-nosh ... Dell E173FP 17" LCD Monitor

Computer wont turn on

Hi\015\012Bad news. your motherboard has been fried. You could try refashing the BIOS but I've got $10 dollars to your one that it wont work. Best bet - keep the tower, keep all of the running gear but a new motherboard and prosessor are in ord ... E-Machines eMachines Desktop PC

Computer wont send signal to monitor

Make sure that the memory is completely seated in the slots. try re seating them.If that does not do it, Find JP1, put the jumper so it is on both pins, then back on only one. this resets the bios.Next time cleaning out the co ... E-Machines eMachines Desktop PC

RGB No Signal Message

First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then ... Gateway FPD1975W 19" LCD Monitor

Wont boot no BIOS and oly a white screen

Typically I have found that it is a connector that is the problem. You're getting power (lights the screen) but you aren't getting a digital signal (Screen Memory Map & Desktop). Check the mylar ribbon cable on the left, that is going under the hing ... Compaq Presario 1700 Notebook

DELL INSPIRON 1501 won't BOOT...and LEDs flashing

Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... Dell InspironTM 1501 Notebook

Compaq presario sr1950nx monitor wont turn on the usual green indicating its on is now orange...tried to inspect the video cable and video connectors for damage its seems fine.....the hard drive is working but the fan seems a little loud.

It sounds to me like the computer is coming on but not booting. That is, there's power but it isn't actually starting up, so no video ever gets to the monitor. Until there is a video signal from the computer (you're calling it the hard drive), the po ... Compaq Computer Monitors

Gateway MT3421 Laptop start-up Issues

Start by removing the battery completely, and plugging the power cord into the wall socket. If the power indicator light comes on at the converter on the cord, your power cord is fine. Then plug the power cord into the computer. If the computer star ... Gateway MT3422 RTL Notebook

PCV-RS720G Sony Vaio : BFG 5500 installed and wont display

Hi thereBoot up in safe mode, F8 on start up, if it lets you into windows, go to the device manager and uninstall the graphics drivers, then reboot the pc, let the PC detect the new card and try install the drivers, have your driver CD in the C ... Sony VAIO PCV-RS720G (027242658103) PC Desktop

Vga Port I wont to My Old Crt Monitor use like a television. So can i gave tv signal via 15 pin monitor input cable. How can I Prepare the Cable Please Help Me. thanks

Hey there!by default, you cannot connect a tv signal cable like that..mainly because, the monitor does not have a built in tuner :)what you need to do is get yourself a tv tuner card, internal or external and you're good to go ... SAMTRON 55V 15" CRT Monitor

My Lg Monitor wont show screen (Power Button Flashing)

The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG Flatron L1750S 17" LCD Monitor

Wont go to normal start up screen!!!

The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6431 seconds