Having problems with your Computer Monitors ?

Hans-G Monitor monitor clicks will not power up

\015 Hans-G Monitor monitor clicks while power light flashes. Will not power up. When this problem started a few days ago it would eventually power up within a minute or so. Now it just clicks constantly. Three years old. Is it worth fixing? I really like the square screen size 14 1/2 x 12 that is nearly impossible to find anymore...\015

Answers :

Sounds like capicitor could be faulty, shouldn't be that difficult or expensive to replace. What will cost you more is the labour so depends how expensive they are on that, if it's not too much then yeah it's worth fixing just ask for a quote first.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hans-G Monitor monitor clicks will not power up


Sounds like capicitor could be faulty, shouldn't be that difficult or expensive to replace. What will cost you more is the labour so depends how expensive they are on that, if it's not too much then yeah it's worth fixing just ask for a quote first. ... Computer Monitors

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Pavilion Dv1000 monitor won't show anything


Power management lets you reduce your Notebook power consumption. Your Notebook has two power management modes:\015\012\015\012\015\012\015\012Hibernation is an energy-saving feature and safeguard that saves informat ... HP Pavilion dv1000 Notebook

Monitor flickring Hi All, i am using the mercury (intel 845 gl chipset) mother board and i installed latest graphic drivers from intel site and i changed my monitor refresh rates also but my monitor gives flickering i tested My cpu with my another freind's monitor but there also gives flickering and i am sure that no magnetic devices are near to my computer and i checked the all power cables and i replaced the all power cables also but it is giving flickering, my monitor is flickering while in t


\015\012Flickering screen display Flickering on the screen can be caused by defective hardware in the computer or by improperly installed software, but it can also be caused by interference from external device ... E-Machines E17T 17" Flat Panel LCD Monitor

Monitor shuts off during boot. Let the machine boot full up, hit the power button, the monitor flashes windows for a split second, and goes back to power saving mode


Hey there Celius,Chances are the 'Refresh Rate' somehow got set too high for the monitor. On flatscreens , the result is a black screen.If you have an old monitor (crt type) hook that up temporarily and reboot.\015\012 ... LG Computer Monitors

To joecoolvette reguarding 2005 compaq presario SR1000 and Dell LCD TFT monitor. The dell monitor was part of my mothers comp and I wasnt given a CD with it. Im sure she dont have it now. As far as the graphics card I plugged the card in first then I ran the disk.


Jason,When a device is installed, Windows 'Breaks it's neck', to find a compatible driver, (Or drivers)If THE driver is not present, then Windows will match up one of it's thousands, of generic drivers it has on hand.The ... Compaq Presario SR1000T (568657) PC Desktop

Similar Problem:posted by Squanto on Feb 26, 2006


Before you give up on this monitor I would try some troubleshooting first. The clicking noise you hear is probably the monitor power going on and off:\015\012\015\012-Make sure you plug your monitor directly into a working wall socket. I?ve had lots ... Dell UltraScan 19" SVGA Monitor, 1600x1200, .25mm, Black P991/B-07

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

Digital power saving mode


Check your monitor power settings.right click on your desk top then left click on 'properties' in the white box that appears.this will bring up a 'display properties' box which should have a tab headed 'screen saver' amongst o ... Gateway FPD2275W LCD Monitor

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

My gateway monitor shows a picture for about 1 second then turns to blacked out screen with power light still on. I can shut the power off on the monitor then turn it back on only to have it do the same thing again and again. I have switched to another monitor to check for computer problems, but all of that checks out fine.


Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.\015\012\015\012If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in th ... Gateway HD2201 22" LCD Monitor

Dell e137fp monitor flashing green...


Below you will find my recommendations for troubleshooting this issue:1. Reseat the power cord and verify a good power source. To reseat the power cord, follow the steps below: 1.1 Power down the system. 1.2 ... Dell E173FP 17" LCD Flat Panel Monitor

External monitor says laptop is in power save mode and goes blank


Hey jkepthis has nothing to do with power, here is what to do right click your desktop-> properties-> click the settings tab->click the advance button->click the display tab->depend ... Acer Aspire 5610 Notebook

Having the same problem as others, my 912n monitor is a black


The problem seems to be that the computer, do not recognize “which monitor’s connected?” Follow these steps to correct the problem: Shutdown the monitor, next shutdown th ... Samsung SyncMaster 912N 19" Flat Panel LCD Monitor

Acer Model AL1916W A reads no signal after being on for 1 hr


The problem seems to be that the computer, do not recognize “which monitor’s connected?” Follow these steps to correct the problem: Shutdown the monitor, next shutdown th ... Acer AL1916W 19" LCD Monitor

Clicking noise when i start my PC


If you you do not have your computer connected to a 750 jewel power strip you may have damaged the power supply if you are not electricly inclined you can buy a power supply checker at radio shack about $12 power supplys run about $39 on up to $100 d ... HP GX612AA Pavilion Media Center M8330F Desktop PC

Hp vs17e monitor says it's in sleep mode then goes blank


If you are running Windows Vista,do the following,\015\012\015\012\015\012Click start,Control panel,\015\012Double click Power options,\015\012On the left menu bar,Click Cha ... HP Vs17 17" LCD Flat Panel Monitor

My monitor says going into power save mode and goes off. The computer tower is still powered up and the power light on monitor blinks. when I press the power button on momitor it says monitor working check connection...Help!!!


Disable Power Management on Windows 7 or Vista \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\ ... Hannspree HANNS-G 19" Widescreen Monitor

Monitor times out and wont come back on.


Try this settings:\015\012\015\012Click on Start | Control Panel | Power Options. \015\012\015\012In the Power Option properties window, click on the Power Schemes Tab \015\012\015\ ... Acer AL1914 19" LCD Monitor

I want to connect a Ultrasharp 1907 FPt monitor to my Dell inspiron. I have a power cable and also one from monitor to lappy, do I need a driver?


Most monitors now-a-day are pnp or upnp (Plug-n-play or Universal Pug-n-Play) So drivers are not always needed. In windows open control panel and then display then screen resolution. This will allow you to choose whether to use you laptop monitor or ... Dell UltraSharp 1907FP 19" LCD Monitor

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Sony GDM-F500R (G1 Chassis) has trouble turning on


Sometimes relay contacts get "sticky" from arc oxide corrosion whenever enough electricity is passed from metal to metal...in a perfect mechanical relay, the relay would be sealed in a vacuum. Try swapping relays to transfer the problem. If you can t ... Sony GDM F500R Monitor

Gallery 1740 Trips out my G5


Right I got my formac monitor open by removing the Bezel, it's tricky\015\012but not too hard. The casing is suprisingly flexible and forgiving. The\015\012clips are backed by a double sided tape on all four edges. Start from the top and give the tap ... Formac Gallery 1740 Oxygen 17.4" LCD Monitor

When turn on the gateway screen apear, but the monitor turn off or black and not apear nothing my computer is gateway profile 4 all in one


Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in the left hand pane ... Gateway Profile 4 All In One (MPN PROFILE4SE) PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6268 seconds