Having problems with your Computer Monitors ?

Out of Range message when I plugged it in

\015 Found this monitor at the office and plugged it into my old HP computer (running XP). Got message: OUT of RANGE. Can this be fixed?\015

Answers :

Find out the correct refresh rate and resolution for the monitor and set you graphics properties to match. I hope this helps.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Out of Range message when I plugged it in


Find out the correct refresh rate and resolution for the monitor and set you graphics properties to match. I hope this helps. ... Computer Monitors

Wacom Cintiq 12WX


I had the same problem with the "signal out of range" box in the middle of the screen. I went to Display on Control Panel and clicked the Settings tab. Click the monitor icon for the Wacom tablet in the window (if you are using more than one monito ... Wacom Cintiq 12WX Interactive Pen Display Monitor

Chimei CMV 938D 'Out of range' error message only when using DVI Connector on specific resolution and color depth


I know this sounds obvious but- I had the same problem, and turns out the cord want plugged in quite properly at the back of the monitor. This may not fix every problem, but, I suggest you check the cord pligged in at the back of the monitor is firml ... Envision EN-7100e 17" Flat Panel LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

''Out of range'' message on an older SVA monitor


This usually means the display resolution settings on your PC are set too high for the monitor to display the signal. Try lowering the resolution on your PC. ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.


It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

"Out of Range" Message


This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to crank it up to 1600x120 ... Compaq Presario V400 14" CRT Monitor

StarLogic- Out of range


The computer needs its screen resolution reducing or changing in aspect ratio to suit the StarLogic monitor. Use a previously-working monitor and reduce the resolution on the computer to 1024 x 768 pixels or less (right-click an unused part of the d ... Star Logic 17" LCD Monitor

Need to change resolution but cannot get onto desktop to do so as the monitor just goes to sleep


Plug it into your laptop and change the settings to the monitor to 800 by 600 pixels, then change the refresh rate to 60 hz or you could change it to 1280 by 1024 pixels and 60hz but it should work with 800 by 600 too, then plug it back into your des ... HP L1706 17" LCD Monitor

The laptop can not be turned on though it is plugged in


Usually such old laptops show problems to turn on if the battery has a loose contact or if its completely blacked out. Looks like you have to change the battery and then keep the lap on charging mode for 2 hrs and then switch on the system and it wil ... Averatec PC Laptops

I have a vusys monitor and for some reason when i plug it in to my computer it displays a message "out of range" and i recieve no picture any solutionfor this please?


Either1.) The resolution/frequency your computer is currently running at is a higher resolution then the monitor can handle. Use a different monitor, if it works then lower resolution and replace with the vusys.2.) You have physica ... PC Desktops

Just got a hand me down Benq model t903 19


Quite the opposite -- your new monitor can't handle the screen settings that you're running on the old monitor.Hook up the old monitor and start up the computer so you're looking at a Windows desktop. If you have windows open, close them ... BenQ Computer Monitors

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

New out of the box lg monitor and upon plug in I get this message on a black screen "Analog out of Range 53.5kHz/85Hz"


Bring it back. The tuner is off. Unless you are using high def and hdmi cords. Otherwise, anything analog or coaxil may not show up on tv. ... Computer Monitors

I have a Starlogic LCD monitor


You have definitely chosen a higher resolution than what your model of monitor could support , if you have a spare monitor please conenct change to regular 1024/768 resolution save it restart system and plug back this monitor and it should work , als ... Computer Monitors

Screen goes blank and message comes up saying "input signal out of range"


When does the screen go blank? Also what do you have plugged into it this most likely just because your input signal may be set at to high a resolution or frequency. Once I have more information I can assist you further.Thanks,Lee ... LG Flatron L1515S 15" LCD Monitor

I recently upgraded my computer and decided to upgrade my monitor as well. I upgraded to the 23" LG W2361 and when i plug the monitor into the computer a message that says Dsub Out of Range 53.6kHz/85Hz pops up i would like to know how to fix that?


Try this when boot up start press the f8 then enable vga mode adjust the screen resolution to the standard setting ... LG L1915S 19" LCD Monitor

Norcent LM550 I have a Norcent LM550 monitor with a 12V power supply. When plugged into the pc I receive an "out of range" message on the monitor. Any ideas?


... Norcent Technologies lm550 (Black, Silver) 15 in. Flat Panel LCD Monitor

Can you help I have just treat myself to sky hd my monitor has a dvi socket on the back so I got a hdmi to dvi connector the problem is the monitor displays a out of range message ! any ideas ?


Hi...there,\015\012Your screen resolution settings are to high...plugged into another monitor right click and go to properties and click on settings to resettings by moving the bar back to 1 or 2 knots from your monitor. ... BenQ FP91G+ 19" LCD Monitor

I have a benq t904 monitor that was given to me. I have plugged it in and it seems to be working well, except there is a blue out of range message in the center that I can't get rid of. What do I need to do?


Right click on an open part of the desktop. Go to your video settings and change resolution. You are trying to use an incompatable resolution or refresh rate. ... BenQ T904 19" LCD Monitor

Mouse running away


Does this model have both the touchpad AND the little eraser-head pointer affixed in the keyboard?\015\012\015\012If so, wiggle the eraserhead pointer thoughout its entire range of motion several times. Don't be afraid of it.\015\0 ... Compaq Armada M700 Notebook

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Plugged in monitor, message reads i need adaptor for GE 8400 card


Driver son ... Dell OptiPlex GX280 PC Desktop

Power surge on hub port


Try this to find out which one of your components has an issue. Turn off your machine then unplug all of your USB cables. Turn your machine back on and plug in one of your USB cables. Verify the component you just plugged in works correctly and if it ... Dell Dimension 4700C PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3814 seconds