Having problems with your Computer Monitors ?

There is no display on the monitor. When I push the power button the display flashes on for three seconds,then goes dark. What can I do?


Answers :

Most likely you have recently changed your resolution.
\015\012try to load your windows on safe mode. then make sure the resolution and refresh rate are set for what the monitor can support.
Hi, make sure leads are fully inserted. could also be faulty graphics card or wrong display settings, can you try it on another computer??
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell E228WFP Monitor failure


To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

There is no display on the monitor. When I push the power button the display flashes on for three seconds,then goes dark. What can I do?


Most likely you have recently changed your resolution.\015\012try to load your windows on safe mode. then make sure the resolution and refresh rate are set for what the monitor can support. ... Computer Monitors

Acer AL1912 19" LCD Monitor goes black after power up.


The problem with this monitor is a leaking capacitor on the power supply board. It is the middle one at the top in a row of three. The value is 10V 1000uf. Common problem for these.\015\012Remove 4 screws from back of display. The case can be p ... Acer AL1912 19" LCD Monitor

Erratic display My display was dark when I returned home. After turning it on and off a brief flickering image appeared then the display turned dark. The computer works fine with another monitor. Turning it on and off brings up a brief flickering image, but it only lasts a second or so before going dark. I just recieved a Gateway FPD 1830,it powers up,but the screen is blank,and when I push the source or on/off button I see the screen display but only for a second or two then it goes blank a


Since the computer works fine with another monitor, now try the defective monitor on another computer.Problem persists, you got a failing electronic part inside or the monitor cable. ... Computer Monitors

Screen goes Black about 1 or 2 seconds after powering up.


You have problem wit the lamp just plug in another once you removed the back cover and if the lamp stays on the it is 100%. you do not need original lamp. Any 15" lcd lamp that fits will do the job. HA HA well done\015\012Ahmad\015\012COM ... Computer Monitors

3yr old got ahold of monitor


Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

Viewsonic VA702B When I push the power button the screen comes on and display a image for about a second. Then the image goes to black and the power light stays green. Does anyone know what is causing this?


Monitor going black after a few seconds can be caused by a faulty power supply or inverter. Some monitors have both as one unit.\015\012\015\012\015\012Sometimes it is basic failed capacitors, After that then I would look at transistors.\ ... ViewSonic VA702b 17" LCD Monitor

Samsung SyncMaster 215tw screen goes black after about 1 sec.


I have the same problem its defenitly a problem with the lcd monitor not with the graphics card nor the pc. I hooked up the digital and afterwards the vga connection both had the same result. 1 s perfect screen all visible but than black. pushing the ... Samsung 215TW SyncMaster 21" LCD Monitor

Like many others, after three years one of my


It sounds like the monitor might have switched input modes for some reason. You can use the menu on the monitor to scroll through the DVI and VGA settings to make sure it is using the right method of connection.Good Luck!Jess ... Samsung 906BW LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Hi I have an Acer Aspire 4220 here that won't power on. When power button is pressed, the power light surrounding the power button lights up and the hard drive starts spinning. After a couple seconds, all goes quite but the power light remains on. Push the power button and the light goes off. Nothing appears on the screen. I have tried it with no battery and with the adapter but still the same. Thanks for your help.


Hello,maybe your laptop is having a screen display issue. To confirm this, connect your laptop to an external monitor and turn the power on again.If you get any display on the monitor, then is means its either your screen boar ... Acer Aspire 5500 5570-2609 Laptop

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

No display the stand by light goes from orange to green the no signal dispay comes on then goes...but the display does not turn on. Tried a different monitor with the same video card and it works. What's the problem


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Neovo E-19A 19" LCD Monitor

Monitor Goes Black


Every now and then I inadvertently push a button on the lower right side of the monitor that causes the display to go blank as if it has stopped receiving a signal from the computer. Unfortunately I can not recall what the settings or buttons are tha ... Gateway FPD2275W LCD Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Same problem screen goes dark.


Hi\015\012\015\012Well I would have thought this to be a classic failing monitor until you said even a new monitor does the same thing. This being the case it can only be the video card or drivers for the card. Resolution is easy to cha ... HP Vs17 17" LCD Flat Panel Monitor

I-INC CY199D lcd monitors will not turn on


The problem is the program for the graphics card is stored on a 16K serial eeprom which is used as a rom this can get corrupted which causes the problems you are experiancing.\015\012I have repaired three of these monitors by re-flashing the ee ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

Blank Laptop Screen


... Toshiba Satellite M45-S265 Notebook

LCD monitor no display - flashing power button


Hate to criticize and then not help out. I have this exact same problem with one of my E152 Dell Displays. I have read around and this whole line of displays seemed to have trouble. I found many issues like this and no solutions. \015\012So ... Dell E152FPc 15" TFT LCD Flat Panel Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

I'm having problems starting my desktop computer. After I push the power button, I hear the computer working but it doesn't fully com on. There's no display on the monitor and I continue to hear the computer working and working.


When you say you hear the computer working and working do you mean that the fans are going and the lights are on? \015\012 \015\012i ask this because the fans and power lights can come on just from the powe ... PC Desktops

Monitor often will not power up when power button is pushed. Disconnecting power for 90 seconds corrects problem. This is an intermittent problem that is occuring more frequently over time. Condition started approximately 6 weeks ago. Second issue (in last three days)....Screen goes black without warning, monitor goes through start-up sequence, displayng Acer logo and then resuming previous image. This has happened four times in three days, and when the screen blacked out, no keyboard or mouse f


I think there is a problem in Monitor's Power Supply unit which integrated in the base board of Monitor. If u expertise with the service then carry on. else Pl contact a Local Service professional to solve the problem ... Computer Monitors

On button I press the on button - it tries to come on - the green lights blink and I hear the reving up sound then it goes out? What do you think?


Look at the power indicator. If it is not lit, no power is being supplied to the computer. Check the following:\015\012\015\012If you are using on the battery, it may be low and unable to power the computer. Connect the AC ... Acer Aspire 3000 Notebook

Dell228wfp on start up pwr on is green screen


Either the cable is not connected to the proper port or the display-source is not configured properly.Here's what you can try.\012\012Ensure that you have connected the VGA/DVI cable in the correct port. If you ... Dell E228WFP LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9334 seconds