Having problems with your Computer Monitors ?

NO Signal, check cable

\015 I purchase the monitor last week, and connected with my small ACER laptop. Work well, but from yesterday says' NO Signal, check cable'. can you explain if any setting has be changed?\015

Answers :

Hi there,

you can enable a second monitor when it is plugged into the rear vga-jack while windows boots up and auto-detects it.

-by right-clicking on the desktop background, goto:
properties - display -settings- advanced - monitor - 2nd monitor:

here enable 2nd monitor.

this is only possible if u have the driver fitting your video-card and windows-version is properly installed!

good luck
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

NO signal since yesterday in area SY7 0QF on Tv can not get any picture or sound was working before


If there is no signal in the area. I mean, if the problem is extended to more than one TV set, then call the TV provider company.If the problem is concerning cable TV (eg. NTL, Virgin), then a local node may be faulty.If ... Tvone LM-1501R 15" Flat Panel LCD Monitor

Monitor display prob


Here are some basic trouble shooting tips for new monitors: The picture does not appearCheck to make sure the signal cable is firmly connected in the socket. Check to see if the computer system's power is ON. Check that th ... PC Desktops

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

My Samsung 913t says "Check Signal Cable." HELP PLEASE!!!


Cheap CRT monitors can be picked up at Thrift Stores, quick and cheap way to test your computer output. ... Samsung SyncMaster 191T 19" Flat Panel LCD Monitor

No signal The TV stopped showing a program and on the screen it read, "no signal". In the household there are two other TVs that operate OK. This is a cable TV setup. Checked the cables and they are all connected firmly


This problem requires you to test both the monitor and the signal input form you cable tv setup. Set the monitor up on a computer and see if it works properly. If it does then you may have a problem with the signal conversion of the cable tv to the ... Envision 19" Widescreen Flat Panel LCD Monitor

Samsung SyncMaster 226BW - floating box "Check Signal Cable"


Had the same issue, called up customer care of samsung and they suggested me to change the cable to D-15 10 series. I was getting the comp o/p on TV but with the "Check Signal Cable" messg with the old VGA cable where some pin is not grounded used fo ... Samsung SyncMaster 2233BW 22" LCD Monitor

Help MONITOR SAYS SIGNAL LOST - REPLACED HARD DRIVE - THOUGHT I HAD A VIRUS. EVERY ONCE IN AWHILE SYSTEM WILL RUN IN EITHER SAFE MODE OR REGULAS WINDOWS. THEN SIGNAL LOST APPEARS. WONDERING IF POWER TO HARD DRIVE IS A PROBLEM MY INDICATOR LIGHT STOPS FLICKERING AND STAYS SOLID. ANY IDEAS. MOTHERBOARD, POWER SUPPLY, ETC?


Signal lost usually means the cable is lose that connects the monitor to the back of your computer.\015\012with the computer off and unplugged , disconnect the monitor cable from the video port on the back of the computer and physically inspect ... E-Machines eMachines Desktop PC

Error message on Syncmaster- check signal cable


Sounds like it might be a graphics card. if u have an old graphics or vidio card, open the case and remove your card then install the old one. if it works now youll know your card is bad. If u have an old video card and an open pci slot install i ... Samsung SyncMaster 940B Monitor

I'm attempting to setup my linksys Wireless-G broadband router up in my home as a secondary wireless router so that i can obtain wireless signal in my basement. I'm running an ethernet cable to it and it is working as a splitter, in that i can run multiple ethernet cables out of the router and they work, but my wireless signal has not improved. how do i setup my router so that it gives of a signal or is my computer just not recieving it?


You have briefed about the hardware or physical connections but not the configuration of the wireless router. On the hardwired computer go RUN, type http://192.168.1.1 (best guess for L ... PC Desktops

I recently purchased a Hawking HSB2 Signal Booster. Two years ago, my son installed a Toshiba Cable modem(PCX2200)and a Belkin Wireless Router(model#F5D7230-4)for Camcast High Speed Internet. The Router was installed to get a High Speed connection to a Windows XP down stairs. Eventually the XP signal got worse and will not work. I'm attempting to boost the signal from the Hawking HSB2 to the XP downstairs. Have also installed a Hawkins internet adapter on the XP. HOW DO I CONNECT THE HSB2 HAWKI


Booster will only work along with access points in your case the belkin wireless router - you have to connect the device to the router not to the windows xp pc \015\012\015\012if you know how to configure and the device are compatiable to ... PC Desktops

No signal on startup


If monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if Siganal cable is connected ur pc then Check ur System IF system is gave the Display anthore monitor . Then Proble is ur monitor signal Cable .S ... Princeton Digital VL2018W Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.


OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Dell 1800FP, no signal found (analog). Green LED on, get message


Check if your signal cable is properly connected to your system unit and make sure that non of the pins of your signal cable is broken.if any of the pins are broken,try and change the whole signal cable and re-connect it again\015\012after foll ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

Cant record from security camera on rd2780


There are several possible reasons for it:\015\012\015\0121. Check for a loose or false contact in the connector jack of the media player. Unplug and plug it again, or rotate it.\015\012\015\0122. The Video/Audio cable is defe ... Toshiba Netcam Software for Record Up To 16 Camera for Security (nwrec01)

MONITOR NOT COMING ON . RGB NO INPUT SIGNAL .


You first take post( power on self test) connect power cord & disconnect signal cable you will see massage no signal check siganl cable then problem will be in cpu this problem may be solved by cleaning dust in cpu if montor shows no display the ... Computer Monitors

Lcd montor not working help - Samsung SyncMaster 920NW Monitor


Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

No signal on computer moniter


1. Check your cable\015\0122. check your cable pins make sure there not bent.\015\0123. Check your video card make sure its putting out the correct resolution for the monitor.\015\012\015\012No signal is just what it is. You m ... Acer AL1715 17" LCD Monitor

My picture is smaller than the screen size.


Dear User,\015\012\015\012This usually happens by selecting the wrong screen resolution or the resolution not supported by your Monitor.\015\012However you can solve this by getting into the "Safe Mode" .\015\012\015\012 ... Samsung SyncMaster 2233BW 22" LCD Monitor

Check Signal Cable


Check VGA cable, ... Philips 109E (White) 19" CRT Monitor

Check signal cable


Hi,You're quite invested in this rig. Most of us PC guys on this board have a setup like yours and we all have our own business were we go onsite and solve problems like these.Your troubleshooting can be done with us but we ha ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

Problem with the monitor


Hi,The three boxes represent the built-in diagnostics of the monitor. The letters G is green, B is blue and R is for red, the 3 color guns of the picture tube of your monitor. The words "Self Test" indicates that it is in diagnostic mode ... Compaq FS7550 17" CRT Monitor

Need Help Using the Presario V2000 Expansion 2 Port


If you have a little plastic cover where the Expansion Port 2 should be, then your specific model doesnt have the port. i know what you mean, when I got my first V2000 i thought the same thing, that there is a port hiding there. my second V2000 had t ... HP Compaq Presario V2000 Notebook

Gateway 900g Hi I have a Gateway 900g monitor that does not work. All was fine working until one day it just stopped working. It wont switch on or anything. I think it may be the power supply board but I cant seem to find one anywhere and I read that you fix them. If so then how much would that cost and how do I go about it. Regards Adrian


I'm writing this using a recently repaired Gateway 900g. You may be correct about the power supply, as that was the problem on this unit. There was absolutely no response with this unit. No blue LED, no dim display. Nothing.\015\012\0 ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5184 seconds