Having problems with your Computer Monitors ?

My monitor is connected, as is my graphics card, but when I turn my computer and my monitor on, it says that there is no input signal.


Answers :

Hello there:
\015\012I would start by trying a different monitor to eliminate the possibility of a faulty monitor.
\015\012if nothing happens you are going to need to investigate the video card. you can turn off the computer and open up the case and remove the power supply to the motherboard cord.
\015\012now remove the video card from the board and check to see that it isn't damaged or dirty . you can try to put it into a different slot if you are able to. now just hook up the powersupply cord back up to the motherboard and hook up the monitor to the computer and power up the computer than the monitor and see if it works if still nothing than i am sorry but you will be needing a new video card ok? i really hope that this is very helpful
\015\012best regards mike
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

When i turn on my computer all it tells me is sva no signal input please check video signal


No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Monitor says no signal


This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

ASAP! Power Problems. Please Help!


There could be several things causing this issue. The power surge could have damaged the main board, power supply, graphics card or on board graphics, cd-rom drive ect. The problem is that one of these things could be bad and you need to figure out w ... HP Compaq Presario SR1420nx (SR1420NXPS69AA) PC Desktop

No signal input


This sounds like fried graphics card... the clue being the error message before it died, \015\012\015\012Does the PC boot so that you can see the Bios Screen, (the very first info that displays) the BIOS screen does not use the windows ... PC Desktops

Monitor malfunction, says VGA Input: No Signal and goes to sleep


From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

I have a hp m9150f pc and a sony wega sdtv, installed a s-viedo wire. need step by step instructions how to program, windows media center says set up tv signal, nothing I do seems to work. can you help me please


Step by step how to enable svideo / tv on your nvidia videocardPreparing the graphics card for TV Output.The\015\012first step in configuring your graphics card for TV output is to first\015\012identify what type of tv output ... PC Desktops

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?


Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

Diablotek radeon 9200 problems.....please help


OK, turn-off the computer, remove and replace the BIOS battery, then start it up with the VGA cable in the onboard graphics port.\015\012Press the corresponding key to go into BIOS setup (Del?) and go to the Integrated Devices menu.\015\0 ... Dell OptiPlex GX260 PC Desktop

NO SIGNAL INPUT - message


Hi Rick,Most common cause of this error is when the video signal cables are knocked off rendering the connection from the monitor to the CPU loose. Turn off the PC and secure all connections. Have you had your computer moved or repaired where y ... Gateway FPD2275W LCD Monitor

I have just set up new desktop Acer. Error message: No input signal.


Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

Hp vs17 has white screen at boot. I have eliminated the chord from the tower and the tower works fine. I have audio, no video. Only a white blank screen. It does not blink or flicker. It just stays white. It happened all of a sudden. I worked yesterday morning, turned off the system for work and on booting after work, well y'all know the rest.


There are three choices here...bad screen, bad connection, or bad video card, if the card is integrated onto the motherboard, then that part of the motherboard could be bad. If you have access to another monitor or a TV with a vga input, try the comp ... HP Vs17 17" LCD Flat Panel Monitor

Monitor malfunction, says VGA Input: No Signal and goes to sleep


If it was your video card, you would have no picture at all. Try to boot in safe mode and do into your options and make sure your hibernation is not on. Only other thing I can think of, it could be *********** board. ... HP Compaq Presario SR2011WM PC Desktop

My monitor is connected, as is my graphics card, but when I turn my computer and my monitor on, it says that there is no input signal.


Hello there:\015\012I would start by trying a different monitor to eliminate the possibility of a faulty monitor.\015\012if nothing happens you are going to need to investigate the video card. you can turn off the computer and open u ... Computer Monitors

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

Hp w1907 monitor not detecting vgi input from original HP x3122 computer


It sounds like your computer has been having some trouble for some time. My hunch is that there is nothing wrong with the monitor at all.\015\012\015\012Usually, when you see this warning on the screen that there is no signal, the monito ... HP Pavilion Slimline S3123W Desktop PC - REFURBISHED

I have just installed a crucial x1600 pro graphics card,when i fired up the computor the monitor displayed multi coloured vertical lines and a box appeared saying it was in analog mode, how do i configure the targa visionary monitor to digital mode. regds A Gough


I'm assuming "it" is the monitor rather than the video card, and that you are using some flavor of windows as your operating system. 1. Digital vs Analog mode is determined by the cable input plug on the monitor that use. Your cable fr ... PC Desktops

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

I have a dell GX280 and I tried to connect it to a Olevia LCD TV but I have a problem to do so. I connect it via VGA cable. When I started the PC I could see TV display Windows logon and show PC is starting up. But then it turned to a blue screen with message 'A problem has been detected and windows has been shut down to prevent damage to your computer.'. and it continued to say that I needed to run a system diagnostic utility to check memory check etc. the technical information was 'Stop: 0x000


Lower you screen resoloution to 800x600 to start with. Also you must setup mutimonitor, correctly.\015\012\015\012\015\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it ... Dell OptiPlex GX280 PC Desktop

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

PC to tv VGA cord hookup. Installed but it said it has no single, will be used as main monetor. Workes but I ca'nt use my keybord to try to get single to tv. a1600n has onley one VGA port and nothing else for my tv to hookup to please help?


First idea to try: make sure the TV is on (saying no signal) before you turn on the computer. Several TV/monitor units will not respond if the computer is already on when the TV is turned on. Check that you have a good cable (they do fail) and well- ... HP Pavilion a1600n (882780776265) PC Desktop

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1984 seconds