Having problems with your Computer Monitors ?

Monitor troubles...out of range

\015 My computer screen says ''out of range''. i checked all the cables and everything is plugged in. I turned it off and back on...still nothing. What do I do?!?!\015

Answers :

Try a different screen on the computer to see if that works - if not it could be the graphics card
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was adjusting picture on monitor and now picture completely messed up

\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

Monitor out of range when a game is booted up

The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Over rang i have 15" proview crt when i start pc then display msg over rang for 9 sec. after this screen will be black.it can't open my bios screen.

On crt monitor adjust screen referesh mde to 75Hzor go to windows safe mod e\015\012You can see your monitor ranges ; \015\012right click desktop -> properties -> settings -> monitor \015\012You'll see Scr ... Proview PT 15.1" LCD Monitor

Problem with compaq MV 520 monitor

Your monitor is operating normally. After Windows starts it is setting the video resolution to something outside of the monitor's range. That's why you see the Windows splash screen, then the message from the monitor about the settings. Most likely t ... Compaq MV 520 Monitor

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.

That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

Monitor displaying out of range message - Hansol Computer Monitors

Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.

It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

Inout signal out of range Answer Failed: retry

It shows out of range because the PC is sending out the video signal that is higher than the monitor can display, you need to set the PC video resolution to the native resolution: 1024 x 768 @60Hz. You can reboot the PC into save mode (hitting F8 key ... IBM ThinkVision L151 15" LCD Monitor


Restart your computer in Safe Mode\015\012(or reconnect your previous monitor).\015\012\015\012Set the screen-resolution to 800 by 600 at 60 Hertz.\015\012Shutdown, connect the new monitor, and restart, and your Soyo monitor w ... Soyo DYLM24D6 LCD Monitor

An Out of range box

Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors


Hi,\015\012It is just that at the initial stage your screen resolution was a tad too high for the capacity of the monitor. As long as you retain the working resolution you should have no problem. To lower or increase, right click on any clear area o ... Soyo DYLM1798 Monitor

Input Signal Out Of Range

Some monitors have low resolution, that if it doesn't support that resolution then you'll expect an "input signal out of range" message on screen. try to boot on "safe mode" if it works then you have to lower your screen resolution at "display proper ... HP Pavilion F1523 15" LCD Monitor

Our viewsonic monitor tilts forward. how do we tilt it back?

Hello again.\015\012\015\012The ViewSonic VG1930wm has a height adjustment range of 3.2", TILT capabilities, and a swivel range of 360 degrees.\015\012\015\012So yes your monitor should be able to tilt back and forth.  Most likely if ... ViewSonic VG1930WM LCD Monitor

Signal out of range

1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

Soyo monitor: Out of Range

"Out Of Range" is more than just resolution. It means your video adapter is set to a resolution/refresh rate setting that is outside the range of supported signals.\012\012Go into your Video Adapter's settings, look at resolution then the re ... Soyo Computer Monitors

Input Signal Out of Range

I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor

Screen says "OUT OF RANGE H:27.8K V: 62.0 - Hyundai ImageQuest QV770 17 in.CRT Conventional Monitor

That's the monitor telling you it's getting a signal it can't handle. The H and V values are the horizontal and vertical frequencies that control the display. They change depending on your computer's video card settings. The monitor can be damaged if ... Hyundai ImageQuest QV770 17 in.CRT Conventional Monitor

StarLogic- Out of range

The computer needs its screen resolution reducing or changing in aspect ratio to suit the StarLogic monitor. Use a previously-working monitor and reduce the resolution on the computer to 1024 x 768 pixels or less (right-click an unused part of the d ... Star Logic 17" LCD Monitor

Connection hook up problem

Set the resolution lower.It is telling you that the resolution you want is beyond its normal operating range.just drop it to lets say 800 x 600Then bump it up one resolution at a time until you get the message again, the ... Computer Monitors

"Out of Range" Message

This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to crank it up to 1600x120 ... Compaq Presario V400 14" CRT Monitor

Out of rang vw193t

Pls temporarily install a older monitor then check the display sttings ,set it to the lowest resolution apply and then check whether its working on the old monitor.Then shut down and connect the new monitor and power on the monitor should work ... ASUS VW193T Monitor

My monitor is linked to an Apple minimac. The monitor says out of range and gives a V: frequency 9 8kHZ anf H. frequency 1 19 HZ what does this mean and how do I reset it?

The message that appeared in your monitor "out of range" and V: frequency 9 8kHZ anf H. frequency 1 19 HZ has something to do with the screen resolution. Meaning that the resolution set on the computer did not meet the required resolution of the moni ... Computer Monitors

24" DOA Soyo Monitor

What size monitor were you using before? If you were using a smaller monitor and everything was fine maybe this new monitor is out of range for the graphics card. I've found that not all graphics cards, especially older ones, will not run a monitor a ... Soyo PC Desktops

I have aoc monitor the problem is out of range

Describe your AOC S7M51, 17 in. CRT Monitor Problem. with external TV Tuner card connected, Message shows "Warning, Not Support, Out of range" and with CPU connected, the same message shows from the booting... ??? are AOC monitors trusted for the ef ... AOC CT720G 17" CRT Monitor

I get error message: Out of Range, on my 17 inch LCD KDS monitor

Get the monitor that you used previously, and on the Windows desktop, go to display properties, in settings> advanced, under the monitor tab, change the refresh rate to 60, which is common on these flat panels. ... KDS Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4412 seconds