Having problems with your Computer Monitors ?

I was given an emachine e17tr monitor but it didnt come with a power suply cord. i looked it up on the internet and it says to use a 12volt ac adaptor. thats fine except i dont know where to plug it in on the monitor bc there arent any plugs on it.. only the vga that comes from the back of it

Answers :

The 12v adapter plugs into a pigtail hanging off the VGA connector at the computer end.

Adapter incorrect.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was given an emachine e17tr monitor but it didnt come with a power suply cord. i looked it up on the internet and it says to use a 12volt ac adaptor. thats fine except i dont know where to plug it in on the monitor bc there arent any plugs on it.. only the vga that comes from the back of it

The 12v adapter plugs into a pigtail hanging off the VGA connector at the computer end. ... Computer Monitors

My v7 lcd monitor just went off and wont come on

Hit here, check the capacitors first, the most common problem in tv/monitors nowadays!The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't ... Sony SDM-HS73P 17" LCD Monitor

Cannot get new Motherboard to boot up in Normal Mode

What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Monitor comes on, then goes back off, rinse, repeat.

Well here is a test you can do. When the monitor goes black, take a flash light and hold at it a angle towards the monitor, if you can still faintly see the image then you have a blacklight/inverter issue. Another common issue with this is the capaci ... Princeton Digital VL1918 Monitor

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Installing more memory

Hi if you go to this site first www.crucial.com then look on the site and it will then scan your computer for you telling you exactly what memory you need like p100 or p133 as getting the wrong one will cause your computer to stop working ok. ... Compaq Presario 5000 PC Desktop

Dell Dimension 4600 Won't Boot Up, Steady Amber Light is on tower

It could very well be the Mobo or the power supply. You may want to try\015\012to take the CMOS battery out for a few mins as well, I have had\015\012problems with that. But I would try PS first, get one from Circuit city\015\012or another electronic ... Dell Dimension 4600 PC Desktop

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Toshiba Tecra S1 - nothing coming up on the screen ??

You can certainly plug the motherboard into an external monitor with all essential components included to do diagnostics as this is exactly the method used on any bench. ... Toshiba Tecra S1 Notebook

Dell inspiron 1525

To get it to connect wirelessly all of the things in bold must be true.\015\012\015\0121. The wireless card driver must be installed and enabled.\015\012\015\012Go to start>right click Com ... Dell Inspiron 6400 Notebook

Studio monitor chaos

Hey buddy, this is a common issue with laptops and professional audio equipment, if your laptop is grounded when you plug it in (third prong on your plug or asymmetrical prongs like in Canada), the electrical signal running through your computer will ... M-Audio DX4 Active Studio Monitors (Pair) Computer Speakers

E-machine 2003. crashed while uploading pix-help!

Excelent description thanx. I assume you have bought a new PC. If so simply remove old HDD and plug it into the DVD cable on the new PC and boot up. It should read the old HDD, simply "copy" pics to new HDD. \015\012\015\012DO NOT "MOVE" ... E-Machines T6528 PC Desktop

GEM GL 1821A black out

At first i would have said it was the video card in your comp,\015\012but if you have tried it on other computers then that cant be the problem.\015\012So if we no its deffinatey not the video card then it is going to be one of two things ... 3G Technology GL1821a (Black) 18 in. Flat Panel LCD Monitor

Samsung 216bw Stuck in standby mode

Do you still have the problem and the monitor? Would you be willing to buy the parts from me for say $75? Or would you be willing to sell yours to me for the same price? I got one that someone dropped and the screen is bad. I either need a good s ... Samsung SyncMaster 216BW Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as

CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

ASAP! Power Problems. Please Help!

There could be several things causing this issue. The power surge could have damaged the main board, power supply, graphics card or on board graphics, cd-rom drive ect. The problem is that one of these things could be bad and you need to figure out w ... HP Compaq Presario SR1420nx (SR1420NXPS69AA) PC Desktop

Cant get it to turn on/ panasonic CF-51 toughbook laptop.

Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Gnr ts700 Screen has gone to the Middle Of the monitor

Vdv.Reparaciones.MadridThe problem is nothing that you can solve just openning the monitor case.So i just want to let you know that is not just a driver gone missing or a bad cable.Unless you have a frind or someone that knows how to fix it i sug ... Gateway FPD2275W LCD Monitor

My monitor just flickers off, glitches on for a split second, then glitches off. I know its not the settings on the computer because I have another computer that works fine, but when I plug this monitor to it it continues its annoying flicker. I never had a power surge or anything. I dont understand what could have caused this. Is this screen salvageable or is it screwed?

Hi imkindacool,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's b ... Liquid Video L17LCD2 17" Flat Panel LCD Monitor

Boots but black screen toshiba satellite M300

See if you can plug in and external monitor and boot from scratch if the external scren comes on then the LCD on the laptop has had it. Ring Toshiba to get it fixed as its in Warrenty. ... Toshiba Satellite Pro M300-S1002X Notebook

My dell 6400i won't boot

Yes I read it and I've seen it. When you connect your hard drive back into the controller socket on the motherboard there is a pin 1, that must match up with pin 1 on the slot. The pin is normally a different color..if you don't put it back with matc ... Dell Dimension 4600 PC Desktop

Emachine 180 (bought 2004)

I have this type of computer (just sitting around , not for my main computer) and I had a smilar problem. I took it to a guy I know (who owns a computer repiar shop) an he said the motherboards on this model go haywire about four years after initial ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

No connection from cpu to screen.

By working fine, I assume you mean the monitor goes into its test/diagnostic displays. If that is the case, most likely your roommate has hit upon more or less the correct deduction. Two possibilites should be attempted before assuming to much ... Compaq Presario 7594 PC Desktop

I have 2 ibm thinkpads t40, on one of the systems the lcd inverter and screen get no power but when i take the lcd and connect it to the 2nd ibm tkpad it works fine, What would be wrong with the one lap top that the inverter wouldnt get power when the colling fan harddrive? again on one system base both lcds work fine, when i connect them to the seconf base the base turns on harddrive works and fan spins but no power to inverter board. how can i fix this

On the second Thinkpad laptop, that doesn't show a display with an LCD screen. Plug a VGA monitor into the VGA port on the back of the laptop. Hold the Fn key down, tap once on the F7 key (Toggle your display over to an external monitor) ... IBM ThinkPad T40 2373 Notebook

Monitor plug not working?

Hi, Initially, pls check the Master/Slave jumpers. Additionally, pls check that the IDE flat cable is connected right.Just a start, do postback how things turned up or should you need additional information. Good luck and Tha ... IBM ThinkPad G40 2388 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9865 seconds