Having problems with your Computer Monitors ?

My emachine is very slow and often sticks

\015 My emachine #T5088 is extremely slow in booting up and often stick on\015\012one item.\015

Answers :

Try to increase the RAM memory to speed up..
Yeah you most likely would see some speed increase with some extra ram. i would add the max your computer can take to be honest with you. If you want to know some info about it, go here

http://www.crucial.com/

there is a scan tool for Ram that will help out tons.
hope it helps
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My emachine is very slow and often sticks


Try to increase the RAM memory to speed up.. ... Computer Monitors

SPoradic faults when booting


This problem isn't easy to diagnose, but there are some things you can try to narrow down the problem. Do this at your own risk, but go into the bios settings and check your processor temperature. Take note that if there's a a feature to enable pro ... PC Desktops

Adding ram, but computer freaks out.


Hi meB,You should ask Hokuwho. He and I had an informative discussion in the lounge involving eMachines just before the Holidaze. I tried to find it so I could put the hyperlink here, but no joy.The good news:He supplied ... E-Machines eMachines Desktop PC

Emachine Desk PC T6216


Power off the computer, remove the power cable, and remove the Ram sticks from your computer, then power the PC back onif it beeps, that is a good sign, since it is detecting that their is no ram present (which the PC needs to load Windows) ... E-Machines eMachines Desktop PC

Vary slow starting up - E-Machines eMachines Desktop PC


Computers are often slowed down on boot because of programs that are starting and running in the background. \015\012\015\012To shut prevent these unneeded programs from starting go to:\015\012start>\015\012run>\015\012type: msconfig\015\ ... E-Machines eMachines Desktop PC

I have a eMachines T5082 and have attempted to upgrade the RAM to 2GB (2x1 gb) PC4200. The problem is the computer will read either one or the other of the modules but not both at the same time. Any suggestions?


Sorry, i re-read your post and saw that you are using 2 sticks,, if you have 4 slots for ram, insert one into the first slow, skip a slot and put the second stick in the 3rd slot, give it a try. ... E-Machines T5082 PC Desktop

The emachine w5233 shouts down after about 2 hours some times less it just turns off i have ran virus checker cleaned pcu out changer power cord pluged into different outlet i had a breif power outage backup power came on computer after this is when the problem has started i am running windows vista premiun computer is about three years old


\015\012Taking into consideration it works for some time before it fails I suspect a thermal issue. I would pay particular attention to the CPU cooler. If you don't feel confident doing this yourself its a cheap repair at a good computer shop. ... E-Machines eMachines Desktop PC

851 MHz Celeron Processor


*********** board will support a max of 1GB of RAM. Your processor is an Intel at 1.8 GHz. The preceding is only true if your PC is the Emachines T1840 as you chose in the category listing of your post. Again if that is true, you can achieve the max ... E-Machines -T1840-CELERON-1.8GHz,40GB Desktop Computer System (1000000127)

I need a Emachines D620 SERVICE MANUAL! I'm needint to replace the hard drive in my friends laptop! READ THIS!!! I AM NOT GOING TO PAY 0.01 FOR SOMETHING I SHOULD BE ABLE TO DOWN LOAD FOR FREE!


One DOESN'T need a service manual to replace a hard drive!\015\012\015\012You just need to open the case where the drive is. Usually a few screws that are obvious on a cover on the bottom of the units for most laptops. Some have only a c ... eMachines eMD620-5133 Notebook

My T1220 IS RUNNING SLOW - E-Machines eMachines Desktop PC


There are a few things you can do to help your computer to run faster. First is do a disc cleanup. Go to "Start", "All Programs", "Accessories", "System Tools", then click "Disc Cleanup", it'll walk you through the rest. Next go to the co ... E-Machines eMachines Desktop PC

Friend has a Emachine T1862 that won't start


May be the CPU fan is going bad. I hope it is that simple. ... E-Machines PC Desktops

More RAM wanted


Max is 256M Memory. You're much better off getting a new system. A new motherboard, processor and ram isn't that much... ... E-Machines eMachines Desktop PC

I tryed to restore my emachine w1800 with my restore disk and when I reboot a blue screen comes up a problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you see this screen try restarting.If it comes up again check for virus or remove newly installed harddrives or controllers. I have two but the second one isn't plugged up.


Could be a couple of things, usually when you get the BSOD (blue screen of death) there is usually a ram problem, have you noticed your pc getting slow, sometimes the ram sticks break down over a period, try getting hold of a memory tester software a ... E-Machines W1800 PC Desktop

Emachines m5309 turns on, but will just keep trying to restart over and over


I had the same problem. The processor is overheating during start up. At first, it would quit while I was watching a DVD, but it got worse until it wouldn't even boot. I thought it was software but I stuck in a fresh hard disk and tried to install th ... E-Machines M5309 Notebook

My fan runs too often - HP Computer System Cooling


\015\012Your fan speeds up and slows down in response to temperature inside the computer. More so the CPU.I would suggest getting a can of compressed air made for computerstake it outside, take of the side and blow all t ... HP Computer System Cooling

How do I tell me emachine T5212 to recognize newly installed ram?


The Ram specifications for your model are: 1024MB DDR2 (2 × 512MB), 533MHz (PC4200)Expandable to 2GBIf you are using Microsoft Windows, the operating system will recognize the memory by itself, there is nothing you have ... eMachines T5212 PC Desktop

Runs very slow and freezes frequently


I would also like to make a recommendation as well :)\015\012\015\012I notice the suite of programs you are using to speed up your computer, ( spyware doctor etc. etc.). If any of those things are running in your background, it can hog u ... Dell Dimension 4600 PC Desktop

What are the slots on the front panel used for?


Those are card reader slots.Various types of memory cards can be used. A memory card, (Or can be stated as Flash Memory Card), takes the place of the old Floppy Disks, for one.It is digital. There is no disk inside ... eMachines ET1810-01 PC Desktop

I would like an internal view of eMachine T4150 to be sure everything is connected correctly


There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

Does my w3507 have an agp port


I found the specs below on their website. Sorry only a PCI Enhanced port, NO AGP. Hope this helps. Best Regards, -md\015\012\015\012\015\012\015\012CPU : \015\012Intel® Celeron® D Processor 352(3.20GHz, 512K ... eMachines W3507 PC Desktop

I upgraded the memory from 1Gb to 2 Gb but my laptop's still slow


Look system performance like gettin slow depends on the condition of hard disk actually after 3 years of use and sometimes new hard drive also gets damaged and slow down bcoz of jerks and\015\012bumps during transportation it degrades there performan ... Toshiba Satellite M55-S3512 Notebook

I have a T2958 and toof the face off. Can you


EMachines doesn't give out this kind of info, and I don't have one in the shop. eMachines also had the habit, of using a few different manufacturer's of motherboards. Intel, TriGem, MSI, Asus,and FIC to name five. Plus eMachines wou ... E-Machines (T2958) PC Desktop

My gateway g7-500 fails to start properly. Whemn power on I get a long beep followed by 2 short ones and the monitor screen remains black.


Cause:This issue can be caused by any of the below situations.\015\012 \015\012\015\012New hardware conflicting with old hardware.\015\012Bad or failing hardware device.\015\012 ... PC Desktops

IBM G41 turns on but has no video output and gives a three beep sound. Can this be fixed? Was there a defect on this mother board?


Try changing your RAM\\Memory. This is often caused by a stick of RAM going bad. You will need to get a notebook stick of PC2700 (333MHz) DDR RAM. I suggest getting a stick that is at least 512MB. The maximum that your computers can take is 2GB (2 st ... IBM ThinkPad G41 Notebook

No telephone service


Hi, I checked the specs for this pc and it only has a Ethernet port. See specs below. \015\012 \015\012\015\012\015\012\015\012Specifications\015\012\015\012\015\012\015\012\015\012\015\012CPU1 : \015\012AMD Athlon™ II X2 dua ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1677 seconds