Having problems with your Computer Monitors ?

I have a 24" acer monitor that I was setting the display settings via computer, wwhen a box appeared in middle of screen(rest is black) and it read"input signal out of range, please selcet 1920x1200x 60hz for best performance. The problem is that now nothing works on monitor. I have tuned it off, along with computer, thinking it may reset, checke the cables, reattached them, tried different monitor(which is working fine) I am at a loss what to do. Help!!


Answers :

Your screen resolution is set incorrectly, boot up in either safe mode or VGA mode and change it from there.
You might have set the dispay settings to high or too fast for the monitor! You should change the Display settings to match (if you still have the old monitor)! Otherwise, try set it in Safe Mode.\015\012
\015\012The speed of refreshing should not go over the specified 60Hz. You might had it set to above 70Hz at other resolution. Should update Display card driver and/or software too.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Data is not sent to the monitor


The first thing to do is to pay attention for "beep" when your press the power button (or the reset button) to turn the computer on or reboot it. The beeps that a PC makes tells you a lot about the state of your computer. I couldn't quote for you the ... Dell OptiPlex GX110 PC Desktop

I have a 24" acer monitor that I was setting the display settings via computer, wwhen a box appeared in middle of screen(rest is black) and it read"input signal out of range, please selcet 1920x1200x 60hz for best performance. The problem is that now nothing works on monitor. I have tuned it off, along with computer, thinking it may reset, checke the cables, reattached them, tried different monitor(which is working fine) I am at a loss what to do. Help!!


Your screen resolution is set incorrectly, boot up in either safe mode or VGA mode and change it from there. ... Computer Monitors

Dell UltraScan P1110 flat-screen monitor BLURRY?


The button you pressed is the reset button and according to the documentaton "returns the monitor to factory defaults".\015\012\015\012Here's a link to the Dell support page for your monitor:\015\012\015\012 ... Computer Monitors

Lg CRT monitor model 500g 17inch -out of frequency


First, you did a great job of explaining and starting to identify the problem. You also eliminated a few things that we would have tried along the way.\015\012PROBLEM DEFINITION: The real issue (as you may already know) appears that the operat ... Computer Monitors

My computer screen is white


Here are the things I would try:\015\012\015\012First, if you have another monitor I would plug it in to see if the problem is actually your monitor or something else. If you don't have access to another monitor then I would try to reset ... Epson Viewsonic ViewPanel VE150M Monitor

PC Problem, p4 processor, intel D850GB . I think its the cpu


Yes you do buy a new processor but here a tip to work it properly because its old enough your motherboard, when you buy a new processor, bring your CPU to the Computer Center, the company you buy a new processor, let them put it in your CPU. If ... Computer Processors

Control Button stopped working? How to reset?


Actually it matters not what computer you have, it's the operating system that's the problem. This is a very common fault in windows 7 and to a lesser extent XP. There are a few problem areas and solutions. Firstly, forget uninstalling the keyboard d ... Dell Inspiron 6400 Notebook

Compaq FP 5315 Moniter


Have you checked the computer bios?\015\012\015\012 \015\012\015\012In case an item was changed in the BIOS, such as the primary display device setting, use the following steps to reset the BIOS back to its default configuration:\0 ... HP Compaq FP5315 15" LCD Monitor

My compaqnc6000 will not come on at all. I took it in today and the guy couldn't figure it out...said it could be the mother board. Then while sitting in traffic I tried it and it came on.I shut it down, brought it home and tried again and I'm getting nothing. Not a blue screen...nothing. It acts as if it's going to come on and then shuts down. Please help???


From your brief diagnoses, and statements made, I'd have to concur with this 'tech',So far. Problem is, that many who aren't qualified, tend to give the diagnoses, 'Needs new motherboard'. Two reasons. One, more mo ... HP Compaq nc6000 Notebook

Tower shuts down after 5-10 seconds.


I've done some reading, and it seems as though this model computer is somewhat known for this problem. \015\012\015\012Heat can absolutely destroy a computer. I think there are most likely some reoccuring issues going on if the computer ... E-Machines T5026 PC Desktop

Dell 24'' Ultrasharp went blank


I suspect the invertor supplying power to the Xenon backlight tubes has failed.\015\012This can be reapired but may not be cost effective.\015\012Ask for a quote from your local computer specialist but keep in mind the cost of a new monit ... Dell Computer Monitors

I have a dell 4600 that I got from my daughter . which I had to re-install and It has a password in the bios for the set up and my daughter dont know


\015\012 \015\012Hi katmbutts;\015\012 \015\012 \015\012Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware ... Dell Dimension 4600 PC Desktop

Problm with viewsonic va712b


Sounds like the operating mode is at a frequency or refresh rate that is outside the viewsonic operating specifications when in normal mode. possible solution: in safe mode access control panel, system, devices (hardware) and look for display. do a r ... ViewSonic VA721 17" LCD Monitor

DEAD SCREEN THERE WAS A POWER FAILURE IN MY AREA AND MY COMPUTER ALONG WITH MY LCD WENT OFF.WHEN I PUT THEM BACK ON THE COMPUTER WAS WORKING FINE , BUT THE LCD WAS ONLY BLANK,IT WAS COMMING ON THOU,BUT WASNT PICKING UP THE COMPUTER IT WAS JUST BLANK,NO WARNING ICONS,(NOTHING AT ALL)


Disconnect completely computer and display form power cable for ten minutes, plug them back and restart ().This is called hard reset.If you still have the problem try checking the display video cable, both in the monitor and computer socket. ... Samsung SyncMaster 740N 17" LCD Monitor

Have just replaced CRT screen with brand new 24- inch Acer V233H LCD widescreen monitor. Couldn't get the recommended resolution, so installed SiS v3.90 driver, (the latest, I think), but my SiS Utility / Support Modes only shows CRT - the LCD part is grayed out. What SiS driver do I need for LCD? Acer says to use 1920 x 1080. I can get this setting with the new driver, but now my Desktop is way longer than the actual screen, and I have to "scroll" left and right, with the mouse, to get to e


Right click anywhere on the desktop\015\012then on the window properties.\015\012then on settings. You should now be seeing your display properties.\015\012Check the slider along the lower left to see if it matches the 1920x1080 ... Acer V233HBD Monitor

I was adjusting picture on monitor and now picture completely messed up


\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

Clicking noise when i start my PC


If you you do not have your computer connected to a 750 jewel power strip you may have damaged the power supply if you are not electricly inclined you can buy a power supply checker at radio shack about $12 power supplys run about $39 on up to $100 d ... HP GX612AA Pavilion Media Center M8330F Desktop PC

Need manual for nokia 447za computer monitor


The adjustments you need to make are for the screen geometry. I haven't been able to locate a manual, so I can't tell you exactly how to access them. Usually there is a menu button that brings up the adjustments, and a couple more (usually marked + a ... Nokia Computer Monitors

Hi,could some one walk me through setting up my Billion modem wirelessly to my Dell Desk top running XP home. I get confused with firewalls,LAN settings etc Ethernet cable is being used at the moment. Do you need drivers etc


I am not familliar with that brand, so I do not know if it is a cable/dsl modem, a router, or a combination of the 2. I will assume it is the cable or dsl modem since you said modem.The thing we need to do first is give you a basic unders ... Dell PC Desktops

Dell monitor keeps turning off...


Hello,The problem you are experiencing is quite common, however the solution can be expensive and frustrating if you are not sure what you are doing. The problem is due to usually 1 of 2 things but the result is the same. The result is that the ... Computer Monitors

Computer Does not Boot correctly, Monitor is Black.


Hmm it seems to be problem with Power Supply, but still if you can give a try connecting your system into other socket may be which is properly grounded one.\015\012\015\012if the above didn't fix your issue, i would suggest you to disassemble ... PC Desktops

Can't change enter BIOS on Ubisurfer... help?


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot ( ... HEWLETT-PACKARD HEWLETT PACKARD PCDO FV879AWABA: HP EliteBook 2530p - Core 2 Duo SL9400 / 1.86 GHz... PC Notebook

I turned on my toshiba l305s-5900d on day and it is asking for a bios password, but i never put on on it. does anyone have any help. i would apprediate any help. thanks john


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot ( ... Toshiba Satellite Pro L300 Notebook

I dont remember the supervisor password now Im locked out of the bios on my laptop and it sucks.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot ( ... Toshiba Satellite A305D-S6835 Notebook

Friend gave me an hp pavillion zv5000 that they couldnt get to work. it needs the power on password and they dont have it. i am a pc tech so i have no problem with doing any kind of laptop surgery. would appreciate any help as this is driving me crazy! you can email me direct at:


Method 1 : Removing the CMOS BatteryThe CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the ... HP Pavilion zv5000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2020 seconds