Having problems with your Computer Monitors ?

NO signal input, for NO reason!

\015 I think that this problem is related to a previous issue that I was trying the resolve.\015\012\015\012The original issue was that only one of my CD drives was working correctly(ish), the other one kept messing around. I decided that switching the two around might give some hints to what the problem might be however once I did that I got ''no signal input'' on my monitor. I then returned the CD drives to the original possition and tried again, the same problem reoccurred.\015\012\015\012- I then tried using a different monitor and cable, that did not work.\015\012- I check that nothing had been dislodged\015\012- I tried disconnecting the CD drives and running without them, that did not work either.\015\012\015\012nothing worked. At a guess I would say that I must have damaged the montherboard when removing the cable for the monitor however how can I check this? I can not see any physical damage.\015\012\015\012There are no error beeps and everything else seems to be running normally, I can hear the fan and so on. Does anyone have any suggestion on what could be the next step (other than buying a new motherboard).\015

Answers :

Check the linked conversations here and here, here and here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)

Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Hello, I have a Gateway model GT5662, stock setup - Will not boot

Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

No input signal

Hi, there is a posibility that the issue is caused by your system unit. NO INPUT SIGNAL occurs when system unit fails to start properly. One possible reason is the power good signal was not sent back by power supply to mother board. You can check ... Acer Aspire L310 (ASL310UD631A) PC Desktop

Westinghouse L1975NW monitor problem

... Westinghouse L1975NW Monitor

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?

Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

My monitor cannot pick up signal.

If your monitor displays No Signal, it means there is no video signal coming from the computer. Monitor is working fine.It may just be the monitor cable. Do you have another one, or one you can borrow from another computer, for a test? ... HP L1706 17" LCD Monitor

NO signal input, for NO reason!

Check the linked conversations here and ... Computer Monitors

I have just set up new desktop Acer. Error message: No input signal.

Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

I just go a nw hp 2009m and I cant get it to work it clicks on for just a second then goes off It works fine on my other flat screen hanns g

Is your other flat screen bigger than the hp 2009m? If so, it may be set at a resolution that the new monitor isn't capable of hitting. Try changing your resolution before plugging it back in. That MAY work to help you. If it's not that, then for som ... Computer Monitors

My nec lcd2080ux monitor had a great screen one day and a blank screen the next. What would be the reason for this? Thanks

When the input is disconnected from the computer there is a 'no signal window' that appears on the monitor. It is clear and crisp suggesting the screen is still operational but the signal from the computer is not getting through or is not being trans ... NEC PC Desktops

Cant record from security camera on rd2780

There are several possible reasons for it:\015\012\015\0121. Check for a loose or false contact in the connector jack of the media player. Unplug and plug it again, or rotate it.\015\012\015\0122. The Video/Audio cable is defe ... Toshiba Netcam Software for Record Up To 16 Camera for Security (nwrec01)

Hp no signal input

Sounds like your graphic card past away. try to find the reason why by removing the side panel of your desktop and check things like fan jammed with dust, or eather slightly unplugged card . or simply, it just broke down.if your computer came ... PC Desktops

Switching between sources on a Samsung SyncMaster 2033

A computer monitor is not truly designed for the purpose you have in mind\015\012\015\012As far as the VGA connector is concerned it is still meant for connection to a COMPUTER\015\012\015\012The same for the HDMI.\015\0 ... Samsung SyncMaster 910MP 19" LCD Monitor

Computer problems my computer says no input signal go to power save and then it shuts of what do that mean

The computer isn't giving you that message; it's coming from the monitor. It means the monitor is working properly but is not getting any signal from the computer. Your computer is not starting up for some reason. You'll need to find out what is keep ... Sony VAIO PCV-RS312 PC Desktop

Screen does not go on- stays black - LG Computer Monitors

Multiple reasons why this can happen.\015\012\015\0121. is it connected properly (have to ask.. :-) )\015\012\015\0122. DOo you have it enabled. (Vista, right click desktop, select Personalize, select display settings, are th ... LG Computer Monitors

Please help - it's possessed!

Click HERE for an explanation of beep codes ... Compaq Armada E500 Notebook

Hp w2007 lcd monitor, osd lockout & main menu display

Once you realize that resetting it doesn't work (as I did ) take it apart. This instruction is for an hp w2007 only! It's the one I just fixed. Remove the three screws holding the base on. The one in the middle is hard to see because it ... HP Pavilion F1523 15" LCD Monitor

I have the same problem. "No Input Signal"

May be the power button get stuck when you pressing to switch on.just change the power button cable with reset button and see. also chek the **** aslo just remove it and clean it and fix it again. ... HP L1706 17" LCD Monitor

My son has an LG monitor - that is hooked up to his xbox ..... & all of a sudden - since yesterday - it keeps going/staying in this 'power save' mode. what do I do?... I've tried to unplug/replug, etc .... ,tiina.

I've done quite a bit of research on this and the problem is with the LG monitor. For some reason the DVI and HDMI ports have a history of going bad and when this happens, the monitor goes into "power save" mode because it thinks that there is no si ... Computer Monitors

I have the same problem!

Hi Robert,\015\012\015\012The monitor is on protect mode because an internal fault had been detected.\015\012\015\012To start unplug monitor from power and from computer and test computer with different monitor to find out if it is ... Microtek C893 18.1" Flat Panel LCD Monitor

HDTV on Mag LT776s

That monitor wont produce the 1280x720 resolution. It isnt hdtv ready ... Mag Innovision LT776s 17" LCD Monitor

I have a tv screen which i use for my computer.I have the hdmi cords going from the video card on the back to my tv.why is it not working

\015\012Identify your TV's input connections. Most TVs these days have three basic types of inputs. You have your coaxial cable input, the same as your cable box or satellite, an RCA composite input (the yellow, red and wh ... Acer Aspire T160 (AST160UA3400) PC Desktop


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

Input Signal Out Of Range

Some monitors have low resolution, that if it doesn't support that resolution then you'll expect an "input signal out of range" message on screen. try to boot on "safe mode" if it works then you have to lower your screen resolution at "display proper ... HP Pavilion F1523 15" LCD Monitor

The screen will not come up but gave this message 'No input signal, go to power save

To isolate the problem, you need a friend with another computer since right now, we don't really know if the video section (or card) of the PC is at fault or the monitor.\015\012\015\012You need to swap displays with someone so you can be certa ... Sony DELUXEPRO SDM-X82 18.1" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1322 seconds