Having problems with your Computer Monitors ?

AOC Monitor says "no signal" and won't wake up!

\015 My AOC F19 monitor is only two months old and has worked fine. But yesterday, when attempting pushing the bottom part of the button (hoping to turn down the brightness, but not having a manual, I wasn't sure what I was doing), it went to sleep and won't wake up. When I turn it off and then on again, it says "no signal" and then immediately the yellow light goes on again, into sleep mode. I can't wake it up. It's connected to a Mac Mini. I have unplugged and replugged every cord I can find, but still it sleeps on. I've turned it off and on multiple times. I've pushed the button (while yellow light is on) multiple times (hopefully not messing it up more!). Help! -- Lindsay\015

Answers :

This monitor refuses to wake up because it cannot find the signal from the computer.
\015\012When the light is amber, force the pc to shut down by holding the power button until all lights go off. Then, after about 10 seconds, power the pc back up again.
\015\012If this does not start your monitor, unplug all the monitors connections and plug them back in again. These things should reform the connection from the pc to the monitor.
\015\012good luck
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

AOC Monitor says "no signal" and won't wake up!

This monitor refuses to wake up because it cannot find the signal from the computer. \015\012\015\012When the light is amber, force the pc to shut down by holding the power button until all lights go off. Then, after about 10 seconds, p ... Computer Monitors

Compaq Presario stuck in sleep mode

Connect the monitor to some other computer, e.g., a notebook, and see if it does the same thing. If it does, then the monitor is the problem.\015\012If it does not, then your computer is not putting-out any "video" signal, and so the monitor g ... HP Pavilion a1710n (RK573AA#ABA) PC Desktop

I have a kyocera kc 100 viewer and it wont wake up the pc monitor can ya help?

Hi,\015\012\015\012As far as I know, your Sharp screen doesn't have a S-video input. How are you inputting the S-video signal to the screen? The fact that it doesn't "wake up" probably means that it isn't receiving a signal. ... Sharp 17" Monitor

Monitor malfunction, says VGA Input: No Signal and goes to sleep

From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

Powering up problems.

Try using another monitor that you know works. Then try another video card. The fans are running because the computer is running ---but the monitor is not. Green to Amber means monitor is not on.\015\012A lot can go wrong with loose wires that ... E-Machines eMachines Desktop PC

My tower wont turn off and monitor says no input signal and keyboard doesnt work

Do you have two video outputs on your PC ie. one on the motherboard adn a separately installed card maybe? If you do you need to set the BIOS so that it uses the AGP/PCIE video card and not the 'onboard'. Try the onbopard vodeo card first to see if y ... HP Pavilion a1610n PC Desktop

RGB No Signal Message

First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then ... Gateway FPD1975W 19" LCD Monitor

Osd lock in my LCD

Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

Monitor says no signal

This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

Hp monitor cannot switch from DVI to VGA because of sleep mode

... HP Pavilion F1703 17" LCD Monitor

My lcd screen does not show images projected by the computer, when the RGB cord is unplugged it says check cable setting and when adjusted and it picks it up it still shows nothing

Good day sir/maam, there are several reasons why your LCD monitor acts like the one you say. but let us start with the common ones.\015\012\015\012check your PC if there is the video signal going out to your mo ... Computer Monitors

When I select sleep or hibernate mode - the monitor stays black...

If the monitor says "no signal" then "going into sleep mode" and won't wake up - do the following: Set the Power Options to not enable hibernation on Hibernation Tab. Put the computer into sleep mode by briefly pushing the Computer's Power Button. ... ViewSonic VX910 19" LCD Monitor

Monitor has power but says not receiving signal and frequency out

Hi, this might be a cable plugged out from your graphics card or from your monitor. Check that first. If the cable fits ok, try changing it with another one to see if it is ok or broken. If it wont do anything, it probabbly needs to go to service for ... Gateway FPD2275W LCD Monitor

AOC 1" - Monitor Says "no signal"

Sounds like a connection problem. Make sure BOTH plugs are securely located. Ian. ... AOC LM729 17" LCD Monitor

I'm having problem with my 16 inch CHIMEI LCD monitor flat screen, first when i booted up my computer it was fine, then i just defrozted my computer(because my computer has a deep freeze program)and then restarted it, when it was restarting THE NO INPUT SIGNAL APPEARED and the light on the monitor turn to orange, i tried restarting the pc but its the same, i check the cables and still the NO SIGNAL input wont go, and my monitor wont wake up.. NEED HELP PLS.. thanks..

In my opion deep freeze (pige head)is not good progrram .itt creat big problem. we should know well how can be use it. once a time u should reinstale it or formate ur computer,i hae facing many problem from my custmer. -----thanks\015 ... Chi Mei Corporation 221A Monitor

My aoc model 729 lcd monitor displays windows start up but then says there is no signal.

My aoc model 729 lcd monitor displays windows start up but then says there is no signal.?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective. ... AOC LM729 17" LCD Monitor

PC or monitor, signal problems

Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

Viewsonic monitor lcd to laptop problem

... Computer Monitors


I was wondering if this person helped you ... Gateway 310 S PC Desktop

Monitor goes to sleep and never wakes up

I have called HP Technical Support 6 times about this issue and have logged at least 14 hours into the issue. The things they have done are turn all sleep settings in the "Power Options" in the control panel to "never". The problem persisted. Today, ... HP w2207 Monitor

New video card wont work, acer monitor no signal

Ok the IGFX is the on motherboard video you will need to set the cmos to clear the setting you did or move the video cable to the motherboard output.after you have used the bios to switch back to the AGP you can start widows in safe mode to acc ... Acer X193W LCD Monitor

Computer "turns on" i hear four to five beeps, but the monitor gets no signal. a friend gave me the computer, only once did i see it boot up fully but it froze up so i had to restart it and it wont work. everytime i try i get the same thing four or five beeps and monitor says no signal. so i dont know whats happening. its a gateway computer runing windows xp. thats all i know. i know the monitor is good cause i tested it on another computer.

Without knowing the exact frequency/length of the beeps my first guess would be a bad stick of ram or a bad video card. If there is more than one stick of ram in the computer try it with one of the sticks pulled, pulling each stick until it does boo ... Gateway GT5028 PC Desktop

Wont go to normal start up screen!!!

The screen that you're seeing is the self-test of the monitor, as it's already stated. It's commonly caused by having no signal coming from the computer to the monitor. You were advised to check the monitor cable, if you have already done that, then ... E-Machines eView 17f3 17" Flat CRT Monitor

Power outage,monitor wont power up,hope its not fried

I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor

Replaced motherboard and power supply. Monitor says No VGA Signal and No DVI Signal, then goes to sleep. Will not wake. Unable to load OS because I cannot view the monitor.

Hi!Sounds like you suffered a power spike and fried somecomponents. So if you;re trying to use the same CPU and RAM theymay well have been damaged as well....Unclear from your request whether you are getting a POST ... HP W2007 LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5813 seconds