Having problems with your Computer Monitors ?

Message: check your PC and signal cable

\015 My emachine displays the following message: check your PC and signal cable. It was working fine until yesterday.\015

Answers :

That Means the Monitor Does Not Detect Your PC..Check The Video Cables And See If they Are Fully Connected
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Error message on Syncmaster- check signal cable

Sounds like it might be a graphics card. if u have an old graphics or vidio card, open the case and remove your card then install the old one. if it works now youll know your card is bad. If u have an old video card and an open pci slot install i ... Samsung SyncMaster 940B Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Message: check your PC and signal cable

That Means the Monitor Does Not Detect Your PC..Check The Video Cables And See If they Are Fully Connected ... Computer Monitors

No signal on first boot

I think is a power supply problem,, ... Nokia 445 Pro 21" CRT Monitor

No signal converter box.

Why is this in the computer section? \015\012\015\012Anyway, don't exchange the box just yet! First, can you access the converter's menu? Because mine automatically comes up with the "no signal, call customer service" message, but I ca ... PC Desktops

My samsung 940N acts like a florescent tube, tries to start and doesn't

Use the self test feature.. follow the steps..\015\012\015\0121. Turn off both your computer and the monitor.\015\0122. Unplug the video cable from the back of the computer.\015\0123. Turn on the monitor.\015\012If the m ... Samsung SyncMaster 940N 19 inch LCD Monitor

HI no startup beep on my emachine and no signal onscreen

According to the gateway book, the "no signal" message shows if leads are removed and means the monitor is working fine, i have checked conections and all is ok. Connecting another hardrive made no difference.  ... E-Machines eMachines Desktop PC

No signal on startup

If monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if Siganal cable is connected ur pc then Check ur System IF system is gave the Display anthore monitor . Then Proble is ur monitor signal Cable .S ... Princeton Digital VL2018W Monitor

Monitor and keyboard won't turn on

A couple of things here:\015\012\015\0121) The flashing light and signal message indicate that the monitor is functioning but is not receiving a signal from the computer.\015\012\015\0122) The memory that you added is liklely ... PC Desktops

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.

OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Dell 1800FP, no signal found (analog). Green LED on, get message

Check if your signal cable is properly connected to your system unit and make sure that non of the pins of your signal cable is broken.if any of the pins are broken,try and change the whole signal cable and re-connect it again\015\012after foll ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

Lcd montor not working help - Samsung SyncMaster 920NW Monitor

Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

Cant record from security camera on rd2780

There are several possible reasons for it:\015\012\015\0121. Check for a loose or false contact in the connector jack of the media player. Unplug and plug it again, or rotate it.\015\012\015\0122. The Video/Audio cable is defe ... Toshiba Netcam Software for Record Up To 16 Camera for Security (nwrec01)


You first take post( power on self test) connect power cord & disconnect signal cable you will see massage no signal check siganl cable then problem will be in cpu this problem may be solved by cleaning dust in cpu if montor shows no display the ... Computer Monitors

Have emachines T6528 graphics problem

If it doesn't boot at all .( this is the reason that you see that message on the screen it means that no video signal came out from the computer ) ..try to change the cable that leads from the pc to the monitor first ...and if the problem its still o ... E-Machines T6528 PC Desktop

Check Signal Cable

Check VGA cable, ... Philips 109E (White) 19" CRT Monitor

Red light on power up. No image on monitor. Pc fans working.

On a computer mainboard there are usually a number of connecting pins right next to one another called RESET, POWER LED, HD LED etc.The power led often leads to the green LED next your power button to show that the juice is available and on. Th ... Aspire Red X-Cruiser Mid Tower ATX Case without Power Supply (CSASXCRUSRD)

The test screen message keeps appearing on my Proview monitor.

... Proview PS 709 17 in.CRT Conventional Monitor

Check signal message when data cable unplugged. blank screen when data cable plugged

This problem is most likely to be caused by a bent or broken pin on the CRT video cable at the VGA connector, OR, this could also be caused by a damaged VGA connector on the back of the laptop.\015\012\015\012If neither VGA connector is at fault, the ... IBM E74 17" CRT Monitor

Samsung syncmaster 931bf check signal cable

... Samsung 931BF 17" LCD Monitor

Tpg computer My monitor keeps up coming up with a no signal message and i cannot turn my cpu off with the power button Do you have any possible solutions?

Well i did not understand what acctually your problem is....\015\012if u can not see anything and only see that message then the problem is which your graphic card or with your monitors data cable....\015\012\015\012\015\012wh ... PC Desktops

New Monitor Installation

Does your computer have more than one video adapter installed. If so, try plugging into the other one. ... Samsung SyncMaster 216BW Monitor

Samsung color monitor

This problem may arise from monitor as well as from cpu.\015\012First of all check it by unplugging the VGA monitor cable.\015\012This will display the "Check Signal Cable" depending on the model of the monitor. But a message will appear ... SAMTRON 55V 15" CRT Monitor

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.

More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

Monitor has no picture

Yes! :)Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer."No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer. ... ViewSonic VX922 19" Monitor Flat Panel
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4884 seconds