Having problems with your Computer Monitors ?

Starlogic 19 inch monitor gets unreadable screen

\015 When I turn my computer on in the morning, the monitor has a ''cloudy'' white screen. There is no image or text visible. The screen goes white with a blue effect moving on it that makes the screen resemble clouds. Nothing can be read on it.By fiddling with the menu buttons (remember, I can't read *ANYTHING* on the screen) and turning it on and off several times, I've been able to get it usable again. Either a direct way to fix this - or (much better) a way to stop this from happening would be greatly appreciated.\015

Answers :

Is this monitor a CRT-type? Chances are your picture tube is malfunctioning. This is a common error among CRT monitors. I advise you to replace the monitor with an LCD, as the power consumption is far less than CRT. Plus, it takes less space.

If you prefer a repair option. have someone "flush" the tube. This may fix the problem.
Repair Help & Product Troubleshooting for Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Starlogic 19 inch monitor gets unreadable screen


Is this monitor a CRT-type? Chances are your picture tube is malfunctioning. This is a common error among CRT monitors. I advise you to replace the monitor with an LCD, as the power consumption is far less than CRT. Plus, it takes less space. ... Computer Monitors

When i first turn my monitor on it works great for a few seconds. If i turn it off and back on it works for a few seconds again then blacks out. If i un plug the power source instead of the on/off button it does the same thing. Power supply is ok.


Larry946, Sorry guy... Your power supply is not OK!!! I'm talking about the one inside the lcd monitor!! It seems as if it is detecting a "FAULT CONDITION" and then proceeds to go into "partial" or "full" shutdown mode, trying to avert a catastrophic ... Star Logic Monitor 11009515

Gateway FPD 1730 Monitor


What has happened is part of your back lighting circuitry has gone out. Yes it is repairable but can cost most of what a replacement monitor will cost these days. Check that out before spending the money. If the problem is only in the back lighting c ... Gateway FPD1775W Monitor

Is it possible to connect 2 external monitors to a dell xps m1330?


Yes, it is possible you can connect 2 or 2 billion external monitors, all you need is the extension cable, which is normally called a spilter or usb to vga spilter, and you can connect as amany as you want.\015\012remember, USB to VGA adapter. ... Dell XPS M1330 Notebook

Toshiba desk-top screen is quite dim. why?


1. adjust the monitors brightness and contrast\015\0122. adjusting the brightness and contrast with your video card software\015\012\015\012if that fails\015\012\015\0121. decide if the monitor is worth the money to repa ... Computer Monitors

PC or monitor, signal problems


Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

Acer AL1916W has black screen


The backlight in your monitor isn't coming on, so all you have is that faint image you see. This trouble is\015\012frequently because of capacitors in the monitor which fail. Often these\015\012parts (cylinder shaped, usually a couple of ... Acer AL1916W 19" LCD Monitor

Have just replaced CRT screen with brand new 24- inch Acer V233H LCD widescreen monitor. Couldn't get the recommended resolution, so installed SiS v3.90 driver, (the latest, I think), but my SiS Utility / Support Modes only shows CRT - the LCD part is grayed out. What SiS driver do I need for LCD? Acer says to use 1920 x 1080. I can get this setting with the new driver, but now my Desktop is way longer than the actual screen, and I have to "scroll" left and right, with the mouse, to get to e


Right click anywhere on the desktop\015\012then on the window properties.\015\012then on settings. You should now be seeing your display properties.\015\012Check the slider along the lower left to see if it matches the 1920x1080 ... Acer V233HBD Monitor

LCD monitor problem


I have a LCD flat monitor and it has a black vertical band on the right side of the screen about 2 inches wide, which hides some of the texts of the web sites. Unable to fix it with the monitor screen control, the problem is obviously nmore complex. ... Computer Monitors

Screen Flickers Hey everybody, if anyone can help i would greatly appreciate it. The screen will be good for a while but it will slowly start to flicker and then it will start flickering really bad. Any Ideas


MONITOR ABCs\015\012The monitor is a hardware device which physically connects to your video card. The monitor allows information and current ... Sony VAIO PCV-V200G PC Desktop

StudioWorks 700s Monitor No Signal


Try to connect the monitor to a different desktop/laptop, to see if it works at all.\012\012Try a different monitor on your computer, to see if the video-card in your computer is the problem.\012\012Or, spend $50 to $100 to bu ... Computer Monitors

Starlogic 20 inch widescreen monitor screen keeps going black


This is probably a back light problem. Take a bright flashlight and while the monitor is on, point it at the LCD and try different angles, etc. If you can see an image, it is the back light, probably the back light voltage converter unit in the lcd ... Computer Monitors

Faulty Monitor? I bought one of these Xerox flat panel 19 inch monitors to replace my convention Sony unit about 4-5 months ago. It has worked just fine until about 7 days ago. Are there any known problems with these Xerox units? I turn my computer off during the day, when I am at work. I also turn my computer off during the night when I am asleep. At those night times I also turn the 'blue power button' on the monitor off as well, as it will flash annoyingly in the room if left in the 'stand


I have also fixed my wife's Xerox monitor Thanks to all the posts on this website !!! I just fixed it yesterday. It was fairly easy.\015\012\015\012 I layed my on a clean towel. Like they said remove ... Xerox XG-91D 19" LCD Monitor

Monitor issues Acer 5610-4621


Hi,\015\012 I suspect it to be more of video card problem rather than a LCD screen issue. If you have and external monitor. Plug the same to the monitor . toggle the display from the LCD to the external monitor, by pressing the FN+F8 key a co ... Acer Aspire 5610-4648 Notebook

Gateway monitor, black screen with blinking power button


Wjfarm48, Sure sounds like a power supply problem. How old is it? How many hours of use? Do you understand what a switch-mode-power-supply and an inverter supply is? If not, then here are your options. Check with Gateway to see if there is a swapou ... Gateway FPD1960 19" Flat Panel LCD Monitor

IBM R40 Screen Problems


I think you have an inverter board thats just about dead. It's located in the screens plastic housing at the bottom of the screen just above the keyboard. It's about 4 inches long and a half inch wide.There's just one little cable connecting it. But ... IBM 11P836402 for ThinkPad R40 Monitor

1440 x 900 setting for monitor means I can't see my whole desktop on my toshiba laptop...


Not all laptops display adapters will allow the individual settings for a screen and a monitor to take effect correctly.\015\012This happens especially when one is a widescreen and the other is a standard screen.\015\012It seems your sett ... Acer AL1916W 19" LCD Monitor

Can not get a full screen lack 1 quarter inch on both side of the screen


If you have an lcd monitor, depending on the model, there should be an auto adjust function which automatically fills up the screen. If it doesn't, follow the CRT instructions below.If you have a CRT monitor however, if you want the monit ... PC Desktops

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

I have a ViewSonic flat screen monitor. The images on the sign in page are fuzzy and unreadable. I have Windows XP.


I would check the connections between the monitor and computer. Also the refresh rate and/or resolution might be wrong. To correct this, you will need to boot your computer in safe mode. (restart computer, right after the computer's logo appears rapi ... PC Desktops

White screen on monitor


Hello,\015\012\015\012The solid white screen on your monitor is caused by a bad power supply not providing the correct voltages to power the display.\015\012If you can solder you should be able to repair the monitor yourself.\015\012The p ... Star Logic Monitor

Black flickering line vertickally through monitor screen


It could be either of these:You're monitor is dying and you need a replacement (Starlogic brand is notorious for dying early and giving poor performance)You're graphics card is going out. If you have an extra monitor laying ar ... Star Logic (11004998) (Black) 15 inch LCD Monitor

Settings for dcl lcd monitor


Hi,Your laptop resolution is greater than the external monitor can handle. From your laptop, try changing the screen resolution to 800x600, if it works, up the ante to 1024x768. You can bring it up again until you find a comfortable screen reso ... Sceptre DCL 7A 17" Flat Panel LCD Monitor

SHARP monitor (-B, not -H) has 3 inch wide vertical 'zones' visible in LCD. Worse to the right.


... Sharp LL T15A4-H (Black) 15" LCD Monitor

Flatron LCD Montor to a Dell Dimension XPS T500


> out of date?\015\012\015\012Are you sure that it is "out of DATE" ???\015\012\015\012\015\012Reconnect your old monitor.\015\012Set the screen-resolution to 800-by-600 at 60 Hertz.\015\012Shutdown. ... LG Flatron L1951S 19" LCD Flat Panel Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0037 seconds